首页> 外文OA文献 >Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V

【2h】

Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V

机译：通过Ti-6al-4V端铣中的工件预热提高可加工性

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
M.I. Hossain; A.K.M. Nurul Amin; A.U. Patwari; A. Karim;
展开▼
作者单位

展开▼
年度 2008
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Study on machining accuracy of thin wall workpiece by end mill (analysis of deflection of workpiece and tool due to cutting force and machining accuracy) [J] . Hiroyasu Iwabe, Tomoharu Shimada, Kazuhiro Yokoyama 日本機械学会論文集. C編 . 1997,第605期

机译：研究立铣刀对薄壁工件的加工精度（由于切削力和加工精度导致的工件和刀具的偏斜分析）
2. Effect of Laser Preheating the Workpiece on Micro end Milling of Metals [J] . Yongho Jeon, Frank Pfefferkorn Journal of manufacturing science and engineering: Transactions of the ASME . 2008,第1期

机译：激光预热工件对金属微细铣削的影响
3. Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2 [J] . A. K. M. Nurul Amin, Shuriani Binti Dolah, Marlina Bind Mahmud, Journal of Materials Processing Technology . 2008,第1a3期

机译：工件预热对淬硬钢D2端铣削期间的表面粗糙度，颤动和刀具性能的影响
4. Machinability Improvement by Workpiece Preheating During End Milling AISI H13 Hardened Steel [C] . Suhaily Mokhtar, AKM Nurul Amin, Anayet Ullah Patwari, Internation Conference on Advances in Materials and Processing Technologies . 2011

机译：工件在铣削期间的工件预热可加工改善AISI H13硬化钢
5. Fundamental tool wear study in turning of Ti-6Al-4V alloy (Ti64) and nano-enhanced Minimum Quantity Lubrication (MQL) milling [D] . Nguyen, Trung Kien 2015

机译：Ti-6Al-4V合金（Ti64）车削和纳米增强最小量润滑（MQL）铣削的基本刀具磨损研究
6. Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V [O] . Zhiqiang Liang, Peng Gao, Xibin Wang, 2018

机译：Ti-6Al-4V加工中不同涂层的微型立铣刀的切削性能
7. Enhancement of tool life by cryogenic and preheated workpiece methods in the milling of Ti-6Al-4V [O] . Lee In-Eon 2015

机译：在Ti-6Al-4V铣削中通过低温和预热工件方法来延长刀具寿命
8. Process Plan Expression, Generation, and Enhancement for the Vertical Workstation Milling Machine in the Automated Manufacturing Research Facility at the National Bureau of Standards [R] . Kramer, T. R. 1987

机译：国家标准局自动化制造研究设施中垂直工作站铣床的工艺计划表达，生成和增强

Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V

著录项

引文网络

相似文献

相关主题

期刊订阅