首页> 外文OA文献 >Failure Mode and Sensitivity Analysis of Gas Lift Valves
【2h】

Failure Mode and Sensitivity Analysis of Gas Lift Valves

机译:气举阀失效模式及灵敏度分析

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Gas-lifted oil wells are susceptible to failure through malfunction of gas lift valves. This is a growing concern as offshore wells are drilled thousands of meters below the ocean floor in extreme temperature and pressure conditions and repair and monitoring become more difficult. Gas lift valves and oil well systems have been modeled but system failure modes are not well understood. In this paper a quasi-steady-state fluid-mechanical model is constructed to study failure modes and sensitivities of a gas-lifted well system including the reservoir, two-phase flow within the tubing, and gas lift valve geometry. A set of three differential algebraic equations of the system is solved to determine the system state. Gas lift valve, two-phase flow, and reservoir models are validated with well and experimental data. Sensitivity analysis is performed on the model and sensitive parameters are identified. Failure modes of the system and parameter values that lead to failure modes are identified using Monte Carlo simulation. In particular, we find that the failure mode of backflow through the gas lift valve with a leaky check valve is sensitive to small variations in several design parameters.
机译:气举油井容易因气举阀故障而导致故障。随着在极端温度和压力条件下在海床以下数千米处钻探海上油井,并且维修和监控变得更加困难,这越来越引起人们的关注。气体提升阀和油井系统已经过建模,但是对系统故障模式的了解却很少。本文建立了准稳态流体力学模型,以研究气举井系统的故障模式和敏感性,包括油藏,油管内的两相流以及气举阀的几何形状。求解系统的一组三个微分代数方程,以确定系统状态。气举阀,两相流和油藏模型已通过井和实验数据进行了验证。对模型进行敏感性分析,并识别出敏感参数。系统的故障模式和导致故障模式的参数值使用蒙特卡洛模拟进行识别。尤其是,我们发现通过带有泄漏止回阀的气体提升阀回流的失效模式对几个设计参数的微小变化敏感。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号