首页> 外文OA文献 >A carbon nanotube–enhanced SiC coating for the oxidation protection of C/C composite materials
【2h】

A carbon nanotube–enhanced SiC coating for the oxidation protection of C/C composite materials

机译:一种碳纳米管增强siC涂层,用于C / C复合材料的氧化保护

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A carbon nanotube-enhanced SiC (CNT-SiC) coating was deposited on C/C composites to improve the oxidation resistance of C/C. The CNT-SiC coating was prepared by direct growth of CNTs on C/C surface at 700 °C followed by deposition of SiC using chemical vapor deposition at 1150 °C for 1 h. SiC was deposited on the CNTs as well as the interface between CNTs and C/C, making CNTs strongly rooted on C/C surface. The final CNT-SiC coating consisted of two layers: the CNT-SiC layer and SiC layer. In comparison to the SiC coating, the CNT-SiC coating showed fewer cracks and a better oxidation resistance because the CNTs reduce the stress in the coating caused by the mismatch of the coefficient of thermal expansion between C/C and SiC.
机译:碳纳米管增强SiC(CNT-SiC)涂层沉积在C / C复合材料上,以提高C / C的抗氧化性。通过在700°C下在C / C表面上直接生长CNT,然后在1150°C下使用化学气相沉积1 h来沉积SiC,来制备CNT-SiC涂层。 SiC沉积在CNT以及CNT与C / C之间的界面上,从而使CNT牢固地扎在C / C表面上。最终的CNT-SiC涂层由两层组成:CNT-SiC层和SiC层。与SiC涂层相比,CNT-SiC涂层显示出更少的裂纹和更好的抗氧化性,因为CNT减少了由C / C和SiC之间的热膨胀系数不匹配导致的涂层应力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号