Remote optical sensing and quantification of single analyte molecules in liquids through a waveguide

摘要

In the work at hand a novel method to detect and quantify single oligonucleotide molecules in liquids is introduced. The aim consists of rapid specific quantification of mRNA molecules in solutions at room temperature by applying free-floating fluorescent molecular switches as integral part of an optical biosensor. The implementation of molecular switches enables the sensor to specifically detect unlabelled oligonucleotide sequences. In the thesis the crucial components consisting of the detection algorithm, the optical setup and the molecular switches (molecular beacons) are elaborated.udIn order to be able to detect single fluorescent bursts in solutions the necessary software has to be developed. Herefore a method for the unambiguous detection of transient burst-like signals in presence of significant stationary noise is described. In order to discriminate a transient signal from the background noise an optimum threshold is determined using an iterative algorithm that isolates the probability distribution of the background noise. Knowledge of the probability distribution of the noise allows excluding the detection of false positive events with a defined probability. The method can be applied to the detection of transient single-molecule fluorescence events in presence of a strong background.udUsing this peak detection method the sensing of single oligo-FRET molecules in buffer solution through a cleaved single mode optical fiber is demonstrated. Both the excitation light and the fluorescence signal are coupled through the same fiber thus implementing a remote detection scheme. The background luminescence created in the glass fiber by the strong excitation light is largely suppressed by the use of a wavelength-shifting concept. Fluorescence bursts are observed by proper stirring of the test solution. In addition, a discussion of the detection efficiency of the cleaved fiber by means of dipole radiation patterns near the glass/water interface is offered.udIn a next step the optimal operation conditions of the setup are described and investigated by varying the relevant parameters over a wide range. This indicates the optimum values for the stirring velocity, the excitation intensity, the bin width and the experiment duration.udIn the next step single molecule detection of oligonucleotide FRET constructs in liquids through a single-mode fiber is applied using the optimal detection conditions, which only then allows for quantification of ultra-low concentrations. A linear dependence of the number of detected fluorescence bursts on the concentration of the test solution over a wide dynamic range is demonstrated, starting at pM down to 1aM concentrations. This qualifies the algorithm and the apparatus to be applied in quantitative sensing applications and establishes the software and hardware elements as a functional unity.udFinally the molecular switches are implicated into the system. The application of molecular beacons to specific detection and quantification of characteristic mRNA sequences in a test solution is demonstrated. In bulk experiments, the performance of the molecular beacons is checked. It is found that single base pair mismatches between beacon and target sequence can be detected through the analysis of melting curves. Single-molecule experiments performed using the optical setup with molecular beacons in absence of targets show that only a negligible fraction of beacons is open at room temperature and produce fluorescence bursts. Upon addition of perfect targets the number of detected bursts increases dramatically. A linear dependence of the number of fluorescence bursts as a function of the concentration of molecular beacon-target sequence duplexes is observed. Furthermore, for a fixed concentration of molecular beacons, a linear increase of the number of bursts as a function of the target sequence concentration can be observed.