首页> 外文OA文献 >Study of preliminary parameters for designing a biomass cutting machine for biomass gasification power plant

【2h】

Study of preliminary parameters for designing a biomass cutting machine for biomass gasification power plant

机译：生物质气化发电厂生物质切割机设计初步参数研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
ณัฐพงษ์ ประภาการ;
展开▼
作者单位

展开▼
年度 2025
总页数
原文格式 PDF
正文语种 th
中图分类

相似文献

外文文献
中文文献
专利

1. Modelling of fluidized bed biomass gasification in the quasi-equilibrium regime for preliminary performance studies of energy conversion plants [J] . Jacek Kalina Chemical and Process Engineering . 2011,第2期

机译：在准平衡状态下流化床生物质气化的模型，用于能量转化装置的初步性能研究
2. Modelling of fluidized bed biomass gasification in the quasi-equilibrium regime for preliminary performance studies of energy conversion plants [J] . Jacek Kalina Inzynieria Chemiczna i Procesowa . 2011,第2期

机译：准平衡态下流化床生物质气化的模型，用于能量转化装置的初步性能研究
3. Simulation study of improved biomass drying efficiency for biomass gasification plants by integration of the water gas shift section in the drying process [J] . Geert Haarlemmer Biomass & bioenergy . 2015,第OCTa期

机译：通过在干燥过程中集成水煤气变换段提高生物质气化厂生物质干燥效率的模拟研究
4. NUMERICAL STUDY OF A SMALL-SCALE MICRO GAS TURBINE-ORC POWER PLANT INTEGRATED WITH A BIOMASS GASIFIER [C] . Fabrizio Reale, Raniero Sannino, Raffaela Calabria, ASME Turbo Expo: Turbomachinery Technical Conference and Exposition . 2020

机译：一种与生物质气化器集成的小型微型燃气轮机 - 兽人电厂的数值研究
5. A Techno-Economic Study of the Reduction of Greenhouse Gas Emissions Through Biomass Co-Firing: A Case Study of Saskatchewan Lignite-Fired Power Plants [D] . AlShubber, Eyad Mohammed. 2018

机译：通过生物质共用减少温室气体排放的技术经济研究 - 以萨斯喀彻温栎发电厂为例
6. Dataset on the assessment of the environmental economic and energy parameters of 5 MW CHP co-gasification plant using South African coal biomass and waste-tyre [O] . M. Ozonoh, T.C. Aniokete, B.O. Oboirien, 2018

机译：评估5MW CHP共气化厂使用南非煤炭生物质和废轮胎的环境经济和能源参数的数据集
7. This article presents a new numerical model describing the behaviour of a thermally thick wood sample exposed to high solar heat flux (above 1 MW/m2). A preliminary study based on dimensionless numbers is used to classify the problem and support model building assumptions. Then, a model based on mass, momentum and energy balance equations is proposed. These equations are coupled with liquid-vapour drying model and pseudo species biomass degradation model. By comparing to a former experimental study, preliminary results have shown that these equations are not enough to accurately predict biomass behaviour under high solar heat flux. Indeed, a char layer acting as radiative shield forms on the sample exposed surface. In addition to this classical set of equations, it is mandatory to take into account radiation penetration into the medium. Furthermore, as biomass contains water, medium deformation consecutively to char steam gasification must also be implemented. Finally, with the addition of these two strategies, the model is able to properly capture the degradation of biomass when exposed to high radiative heat flux over a range of sample initial moisture content. Additional insights of biomass behaviour under high solar heat flux were also derived. Drying, pyrolysis and gasification fronts are present at the same time inside of the sample. The coexistence of these three thermochemical fronts leads to char gasification by the steam produced from drying of the sample, which it is the main phenomenon behind medium ablation. [O] . Pozzobon, Victor, Salvador, Sylvain, Bézian, Jean Jacques 2018

机译：本文提供了一个新的数值模型，该模型描述了暴露于高太阳热通量（高于1 / MW / m2）的热厚木材样品的行为。基于无量纲数的初步研究用于对问题进行分类并支持模型构建假设。然后，提出了一种基于质量，动量和能量平衡方程的模型。这些方程式与液体蒸汽干燥模型和假物种生物质降解模型耦合。通过与以前的实验研究进行比较，初步结果表明，这些方程不足以准确预测高太阳热通量下的生物量行为。的确，在样品暴露的表面上形成了充当辐射屏蔽层的炭层。除了这套经典的方程式之外，还必须考虑到辐射向介质的渗透。此外，由于生物质中含有水，因此还必须在炭蒸气汽化后进行连续的介质变形。最后，通过添加这两种策略，该模型能够在一定范围的样品初始水分含量下暴露于高辐射热通量的情况下，正确捕获生物质的降解。还得出了在高太阳热通量下生物量行为的其他见解。样品内部同时存在干燥，热解和气化前沿。这三个热化学前沿的共存会导致样品干燥产生的蒸汽产生焦炭气化，这是介质烧蚀的主要现象。
8. Diesel power plants based on biomass gasification. Final report [R] . Kurkela, E. , Staahlberg, P. , Solantausta, Y. , 1996

机译：基于生物质气化的柴油发电厂。总结报告

Study of preliminary parameters for designing a biomass cutting machine for biomass gasification power plant

著录项

引文网络

相似文献

相关主题

期刊订阅