首页> 外文OA文献 >Zirconia phase transformation in retrieved, wear simulated and artificially aged ceramic femoral heads
【2h】

Zirconia phase transformation in retrieved, wear simulated and artificially aged ceramic femoral heads

机译:回收,磨损模拟和人工老化的陶瓷股骨头的氧化锆相变

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。
获取外文期刊封面目录资料

摘要

Zirconia in Zirconia toughened alumina ceramic hip replacements exists in an unstable state and can transform in response to stress giving the material improved fracture toughness. Phase transformation also occurs under hydrothermal conditions such as exist in vivo. To predict the hydrothermal aging that will occur in vivo accelerated aging procedures have been used, but validation of these models requires the study of retrieved hip joints. Here 26 retrievals are analysed to determine the degree of phase transformation in vivo. These were compared with virgin heads, heads that had undergone the accelerated aging process and heads wear tested to 5 million cycles in a hip simulator. Monoclinic content and surface roughness were measured using Raman spectroscopy and white light interferometry respectively. The monoclinic content for retrieved heads was 28.5% ± 7.8, greater than twice that in virgin, aged or wear tested heads and did not have a significant correlation with time, contrary to the predictions of the hydrothermal aging model. The surface roughness for retrieved heads in the unworn area was not significantly different to that in virgin, aged or unworn areas of wear tested heads. However in worn areas of the retrieved heads, the surface roughness was higher than observed in wear simulator testing. These results indicate that current testing methodologies do not fully capture the operational conditions of the material and the real performance of future new materials may not be adequately predicted by current pre-clinical testing methods. This article is protected by copyright. All rights reserved
机译:氧化锆增韧氧化铝陶瓷髋关节置换物中的氧化锆以不稳定状态存在,并且可以响应应力而转变,从而赋予材料改善的断裂韧性。相变还发生在诸如体内存在的水热条件下。为了预测体内将发生的水热老化,已经使用了加速老化程序,但是要验证这些模型,需要研究收回的髋关节。在这里分析了26次取回以确定体内的相变程度。将这些与原始的头部,经过加速老化过程的头部以及在髋部模拟器中测试到500万次循环的头部磨损进行了比较。单斜晶含量和表面粗糙度分别使用拉曼光谱法和白光干涉法测量。与水热老化模型的预测相反,取回的水头的单斜晶含量为28.5%±7.8,是原始,老化或磨损测试的水头的两倍,并且与时间没有显着相关性。未磨损区域中回收的头部的表面粗糙度与磨损测试过的头部的原始,老化或未磨损区域中的表面粗糙度没有显着差异。但是,在回收磁头的磨损区域中,表面粗糙度高于在磨损模拟器测试中观察到的粗糙度。这些结果表明,当前的测试方法无法完全捕获材料的操作条件,并且当前的临床前测试方法可能无法充分预测未来新材料的实际性能。本文受版权保护。版权所有

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号