首页> 外文OA文献 >Instrument Tracking and Navigation for MRI-guided Interventions
【2h】

Instrument Tracking and Navigation for MRI-guided Interventions

机译:mRI引导干预的仪器跟踪和导航

摘要

Interventional MRI requires accurate and fast localization of medical instruments within the imaging volume of the MR scanner. Furthermore, in view of tissue motion and target dislocation, accurate intra-operative imaging is demanded. The research presented in this thesis addresses these issues with reference to a proposed MRI-guided transrectal prostate biopsy system.udAs the instrument is not visible in the MR images, RF fiducial markers embedded within the instrument are used to determine its pose. A novel localization method to compute the location of N fiducial markers using 1D projections is presented. The method is shown to yield significant improvements over previously proposed methods. Computational complexity was significantly reduced by avoiding cluster analysis, while high accuracy was achieved by using a set of optimally chosen projections and by applying Gaussian interpolation in peak detection. The method was analyzed and validated using a combination of experiments and Monte Carlo simulations. Experiments in 1.5 T and 2.9 T MR scanners involved both water phantoms and volunteer subjects. High robustness and sub-pixel accuracy were demonstrated while the computational time showed an improvement of up to a factor of 100 over existing solutions.udThis method was employed as the basis for tracking the endorectal probe during the prostate biopsy procedure. The probe was positioned by means of a remotely actuated manipulator. Miniature semiactive markers were embedded within the probe in a rigid known geometrical configuration and tracked by means of the localization method. At each position, Least-Squares fitting of the probe model with the localized one was performed in order to achieve more accurate tracking. Navigation of the probe and biopsy needle was realized through a dedicated graphical user interface. This interface displayed interpolated cross sections through the MR imaging volume and simplified graphical models of the instruments overlaid on the anatomy. Visual guidance was further improved by filtering of the markers' positions, which was enabled by the high tracking rate.udIn order to improve intra-operative imaging a novel external receiver array was designed and a prototype was built, as an alternative to the more conventional endorectal and pelvic receivers. This new array coil was optimized for imaging of the prostatic area for a patient in the prone position by combining a buttery coil and three single trapezoidal loops. The design is suitable for positioning the endorectal probe and does not introduce any spatial limitation to the range of movements. Experiments in a 1.5 T MR scanner and simulations demonstrated higher receiver sensitivity and homogeneity than conventional coils and also a significantly improved signal-to-noise ratio.
机译:介入式MRI需要在​​MR扫描仪的成像空间内准确快速地定位医疗器械。此外,鉴于组织运动和靶位错,需要精确的术中成像。本文提出的研究参考了拟议的MRI引导的经直肠前列腺活检系统解决了这些问题。 ud由于该仪器在MR图像中不可见,因此使用嵌入在仪器中的RF基准标记来确定其姿势。提出了一种使用一维投影来计算N个基准标记位置的新颖定位方法。与以前提出的方法相比,该方法显示出明显的改进。通过避免聚类分析,可显着降低计算复杂性,而通过使用一组最佳选择的投影并在峰检测中应用高斯插值可实现较高的准确性。通过结合实验和蒙特卡洛模拟对方法进行了分析和验证。在1.5 T和2.9 T MR扫描仪上进行的实验涉及水体模和志愿者受试者。证明了其高鲁棒性和亚像素精度,而计算时间却比现有解决方案提高了近100倍。 ud这种方法被用作在前列腺活检过程中跟踪直肠内探针的基础。探针通过遥控操纵器进行定位。微型半活性标记以已知的刚性几何构型嵌入探针中,并通过定位方法进行跟踪。在每个位置,都执行了探针模型与局部模型的最小二乘拟合,以实现更精确的跟踪。探头和活检针的导航是通过专用的图形用户界面实现的。该界面显示了通过MR成像体积插入的横截面以及覆盖在解剖结构上的器械的简化图形模型。为了提高术中成像,设计了新型的外部接收器阵列并制作了原型,作为对其他方法的替代方案,通过对标记位置进行过滤,进一步提高了视觉指导。传统的直肠内和骨盆接收器。通过组合黄油状线圈和三个单梯形环,此新型阵列线圈针对患者俯卧位置的前列腺区域成像进行了优化。该设计适合于定位直肠内探针,并且不会对运动范围造成任何空间限制。在1.5 T MR扫描仪中进行的实验和模拟表明,接收器的灵敏度和同质性均高于传统线圈,并且信噪比也得到了显着改善。

著录项

  • 作者

    Galassi Francesca;

  • 作者单位
  • 年度 2014
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号