首页> 外文OA文献 >Calorimetric investigations of a series of energetic polyphosphazenes
【2h】

Calorimetric investigations of a series of energetic polyphosphazenes

机译:一系列高能聚磷腈的量热研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Energetic, fluorinated, linear polyphosphazenes are currently under investigation as potential, high-density binders for new, polymer bonded explosive compositions. A series of such polymers was synthesised and the enthalpy of combustion of each member of the series was measured by static bomb calorimetry. This was performed after combusting appropriate secondary thermochemical standards to model the combustion stoichiometry of the heteroatoms nitrogen, fluorine and phosphorus. The water-soluble combustion products were identified and quantified using 19F NMR spectroscopy and Ion Chromatography. Since some of the combustion products are hydrolytically unstable, it was found necessary to stabilise the initial combustion product mixtures by using a buffer solution instead of pure water in the bomb, and then to determine the composition of the stabilised product mixtures in order to obtain meaningful values for the enthalpies of combustion and thence enthalpies of formation. The thermochemical measurements themselves were made with pure water in the bomb. The composition and structures of the various polyphosphazenes were correlated with their energies of combustion and enthalpies of formation. The latter were calculated using the latest CODATA values of enthalpy of formation of the combustion products. The ‘combustion’ of the polyphosphazenes under a nitrogen atmosphere was also investigated with the view to calculating the enthalpies of detonation of each member of the series. Three conference papers which include the results of this work have been published and are included in Appendices C-E.
机译:高能的,氟化的,线性的聚磷腈目前正在研究中,作为潜在的,高密度的新型聚合物粘结炸药组合物的粘合剂。合成了一系列这样的聚合物,并且通过静态炸弹量热法测量了该系列的每个成员的燃烧焓。这是在燃烧适当的次级热化学标准品以模拟杂原子氮,氟和磷的燃烧化学计量之后进行的。使用19F NMR光谱和离子色谱法鉴定并定量了水溶性燃烧产物。由于某些燃烧产物是水解不稳定的,因此发现有必要通过使用缓冲溶液代替炸弹中的纯水来稳定初始燃烧产物混合物,然后确定稳定产物混合物的组成,以获得有意义的结果。燃烧焓和形成焓的数值。热化学测量本身是用炸弹中的纯水进行的。各种聚磷腈的组成和结构与其燃烧能量和形成焓相关。后者是使用燃烧产物形成焓的最新CODATA值计算的。还研究了氮气氛下聚磷腈的“燃烧”,以计算该系列每个成员的爆炸焓。包含这项工作结果的三篇会议论文已经出版,并包含在附录C-E中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号