首页> 外文OA文献 >Influence of the mechanical environment upon the healing of segmental bone defects in the rat femur
【2h】

Influence of the mechanical environment upon the healing of segmental bone defects in the rat femur

机译:机械环境对大鼠股骨节段性骨缺损愈合的影响

摘要

Loss of large segments of bone creates critical size defects (CSDs). These fail to heal spontaneously and present major clinical challenges to orthopaedic surgeons. The research described in this thesis is based upon the hypothesis that the healing of CSDs is responsive to the ambient mechanical environment, and can be accelerated by mechanical modulation. This hypothesis was tested in rat, femoral CSDs treated with recombinant, human, bone morphogenetic protein-2. For this study I designed novel external fixators allowing experimental control over the local mechanical environment. These were characterised by extensive mechanical testing prior to evaluation in the rat model. Low stiffness fixators induced callus formation 9 days after surgery, whereas rigid fixation delayed it until 2 weeks. All defects were radiologically bridged after 3 weeks. Rats were euthanised after 8 weeks and the defects evaluated by a battery of imaging, mechanical and histological tests. All confirmed the superiority of the lowest stiffness fixators. Based upon these data, I hypothesised that healing would be improved by imposing low stiffness for the first two weeks of healing, followed by high stiffness for the remaining six weeks. The experimental data confirm that this regimen dramatically accelerated callus formation and maturation, and induced faster remodelling of endosteal and periosteal callus. This was associated with higher failure strength, fewer trabeculae, decreased callus size and thicker and more uniform distribution of new cortical bone. Histologically it was not possible to detect cartilage within the defects prior to the appearance of bone, suggesting that healing either does not occur through endochondral ossification, or that this process is very rapid. These data confirm that the healing of CSDs is highly responsive to the ambient mechanical environment, allowing the rate and quality of healing to be manipulated. This information will help develop more efficient ways to heal CSD clinically.
机译:大块骨头的丢失会造成临界尺寸缺损(CSD)。这些无法自愈,并且给整形外科医生带来了重大的临床挑战。本文所描述的研究基于这样的假设,即CSD的愈合对周围的机械环境有响应,并且可以通过机械调制来加速。在用重组人骨形态发生蛋白2处理的大鼠股骨CSD中测试了该假设。对于本研究,我设计了新颖的外固定器,可以对本地机械环境进行实验控制。在对大鼠模型进行评估之前,通过广泛的机械测试来表征这些特征。低刚度固定器在手术后9天诱导愈伤组织形成,而硬性固定将其延迟到2周。 3周后所有影像均通过放射线桥接。 8周后对大鼠实施安乐死,并通过一系列影像学,机械学和组织学测试评估其缺陷。所有这些都证实了最低硬度固定器的优越性。根据这些数据,我假设通过在康复的前两周施加低刚度,然后在其余六周施加高刚度,可以改善愈合。实验数据证实,该方案显着加速了愈伤组织的形成和成熟,并诱导了骨内和骨膜愈伤组织的更快重塑。这与更高的破坏强度,更少的小梁,愈伤组织的大小减小以及新皮层骨的分布更厚更均匀有关。从组织学上讲,不可能在出现骨之前检测出缺损处的软骨,这表明愈合不是通过软骨内骨化发生的,或者这一过程非常迅速。这些数据证实,CSD的愈合对周围的机械环境具有高度的响应能力,从而可以控制愈合的速度和质量。这些信息将有助于开发更有效的方法来临床治愈CSD。

著录项

  • 作者

    Glatt Vaida;

  • 作者单位
  • 年度 2009
  • 总页数
  • 原文格式 PDF
  • 正文语种 English
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号