首页> 外文OA文献 >Atomic layer deposition of sodium and potassium oxides: evaluation of precursors and deposition of thin films
【2h】

Atomic layer deposition of sodium and potassium oxides: evaluation of precursors and deposition of thin films

机译:氧化钠和氧化钾的原子层沉积:前体的评估和薄膜的沉积

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Thin films of sodium and potassium oxides have for the first time been deposited using atomic layer deposition. Sodium and potassium complexes of tert-butanol, trimethylsilanol and hexamethyldisilazide have been evaluated as precursors by characterising their thermal properties as well as tested in applications for thin film depositions. Out of these, sodium and potassium tert-butoxide and sodium trimethylsilanolate and hexamethyldisilazide were further tested as precursors together with the Al(CH3)3 + H2O/O3 process to form aluminates and together with ozone to form silicates. Sodium and potassium tert-butoxide and sodium trimethylsilanolate showed self-limiting growth and proved useable at deposition temperatures from 225 to 375 or 300 °C, respectively. The crystal structures of NaOtBu and KOtBu were determined by single crystal diffraction revealing hexamer- and tetramer structures, respectively. The current work demonstrates the suitability of the ALD technique to deposit thin films containing alkaline elements even at 8′′ wafer scale.
机译:钠和钾氧化物的薄膜是首次使用原子层沉积法沉积。叔丁醇,三甲基硅烷醇和六甲基二硅叠氮化物的钠和钾络合物已通过表征其热性能进行了评估,并在薄膜沉积应用中进行了测试。其中,叔丁醇钠和钾以及三甲基硅烷醇钠和六甲基二硅叠氮化物与Al(CH3)3 + H2O / O3工艺一起形成铝酸盐,并与臭氧一起形成硅酸盐进行了进一步测试。叔丁醇钠和叔丁醇钾和三甲基硅烷醇钠表现出自限性生长,并分别在225至375或300°C的沉积温度下可用。 NaOtBu和KOtBu的晶体结构通过单晶衍射确定,分别显示六聚体和四聚体结构。当前的工作证明了ALD技术的适用性,即使在8'晶圆级,也可以沉积包含碱性元素的薄膜。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号