首页> 外文OA文献 >Ternary CdS/Au/3DOM-SrTiO3 composites with synergistic enhancement for hydrogen production from visible-light photocatalytic water splitting
【2h】

Ternary CdS/Au/3DOM-SrTiO3 composites with synergistic enhancement for hydrogen production from visible-light photocatalytic water splitting

机译:具有协同增强作用的三元CdS / Au / 3DOM-SrTiO 3 复合材料用于可见光光催化水分解制氢

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

New ternary composites based on three dimensionally ordered macroporous (3DOM) SrTiO (CdS/Au/3DOM-SrTiO) were prepared and used as photocatalysts in visible light (λ > 420 nm) photocatalytic water splitting for hydrogen evolution. Through optimizing the pore size of 3DOM-SrTiO materials and the loading amounts of Au and CdS, CdS/Au/3DOM-SrTiO(300), templated by 300 nm sized poly(methyl methacrylate) colloids, was found to exhibit a remarkably enhanced photocatalytic hydrogen evolution rate (2.74 mmol/h•g), which was 3.2 times as high as that of CdS/Au/C-SrTiO catalyst based on commercial SrTiO. This notably enhanced photocatalytic performance was mainly attributed to the slow photon enhancement effect of 3DOM-SrTiO(300) material, which significantly promoted the light harvesting efficiency of ternary composite for the slow photon region of 3DOM-SrTiO(300) was well matched with the optical absorption band of photocatalyst. Further depositing Pt nanoparticles on CdS/Au/3DOM-SrTiO(300) composite as a co-catalyst, an extraordinarily high hydrogen evolution rate (up to 5.46 mmol/g•h) and apparent quantum efficiency (42.2% at 420 nm) were achieved because of the synergistic effect of efficient carrier separation, Au SPR effect, and slow photon effect. Furthermore, these ternary CdS/Au/3DOM-SrTiO composite photocatalysts were very stable and could be easily recycled four times in visible light photocatalytic water splitting experiments without any loss in activity.
机译:制备了基于三维有序大孔(3DOM)SrTiO(CdS / Au / 3DOM-SrTiO)的新型三元复合材料,并将其用作可见光(λ> 420 nm)光催化水分解中的光催化剂以释放氢。通过优化3DOM-SrTiO材料的孔径和Au和CdS的负载量,发现以300 nm大小的聚甲基丙烯酸甲酯胶体为模板的CdS / Au / 3DOM-SrTiO(300)具有显着增强的光催化性能氢析出速率(2.74 mmol / h•g),是基于商用SrTiO的CdS / Au / C-SrTiO催化剂的3.2倍。这种显着增强的光催化性能主要归因于3DOM-SrTiO(300)材料的缓慢光子增强作用,这显着提高了三元复合材料的光收集效率,因为3DOM-SrTiO(300)的慢光子区域与三元复合材料很好地匹配。光催化剂的光吸收带。在CdS / Au / 3DOM-SrTiO(300)复合材料上进一步沉积Pt纳米颗粒作为助催化剂,具有极高的析氢速率(高达5.46 mmol / g•h)和表观量子效率(在420 nm下为42.2%)。由于有效的载流子分离,Au SPR效应和缓慢的光子效应的协同效应而实现了这一目标。此外,这些三元CdS / Au / 3DOM-SrTiO复合光催化剂非常稳定,在可见光光催化水分解实验中可以很容易地循环使用四次而不会损失任何活性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号