首页> 外文OA文献 >Kinetic Testing of Nitrate-Based Sodalite Formation Over the Temperature Range of 40 to 100 Degrees Centigrade (Final Report)

【2h】

Kinetic Testing of Nitrate-Based Sodalite Formation Over the Temperature Range of 40 to 100 Degrees Centigrade (Final Report)

机译：在40到100摄氏度的温度范围内对硝酸盐基方钠石形成的动力学测试（最终报告）

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Mattus, A.J.;
展开▼
作者单位

展开▼
年度 2001
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. The characterization of scintillator performance at temperatures up to 400 degrees centigrade [J] . Lynn A. Boatner, John S. Neal, James A. Kolopus, Nuclear Instruments & Methods in Physics Research . 2013,第maya1期

机译：闪烁体在高达400摄氏度的温度下的性能表征
2. Lipid formation by aqueous Fischer-Tropsch-type synthesis over a temperature range of 100 to 400 degrees C [J] . Rushdi AI., Simoneit BRT. Origins of Life and Evolution of the Biosphere: The Journal of the International Society for the Study of the Origin of Life . 2001,第1a2期

机译：在100至400摄氏度的温度范围内通过水性费-托合成法形成脂质
3. Kinetics of the n,gamma-radiolysis of the N2O4-NO system over the temperature range 200-400 degrees C and the pressure range 0.1-16.0 MPa [J] . Brazovskii II High Energy Chemistry . 2007,第5期

机译：N2O4-NO系统在200-400摄氏度的温度范围和0.1-16.0 MPa的压力范围内的n，γ辐射动力学
4. Operating Characteristics of 2-8 GHz GaAs MESFET Amplifiers at Elevated Case Temperatures to 200 Degrees Centigrade [C] . Crescenzi E.J., Thompson J.A., Kritzer T.R., . 1975

机译：外壳温度升至200摄氏度时2-8 GHz GaAs MESFET放大器的工作特性
5. VISCOSITY OF AMMONIA IN THE DENSE PHASE REGION: PRESSURES UP TO 5000 PSI AND TEMPERATURES OF 100, 150, AND 200 DEGREES C. [D] . SHIMOTAKE, HIROSHI. 1960

机译：密相区氨的粘度：压力高达5000 PSI，温度为100、150和200摄氏度。
6. The survival of Escherichia coli in an aerosol at air temperatures of 15 and 30 degrees C and a range of humidities. [O] . C. M. Wathes, K. Howard, A. J. Webster 1986

机译：大肠杆菌在气溶胶中在15和30摄氏度的温度以及一定湿度范围内的存活率。
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

Kinetic Testing of Nitrate-Based Sodalite Formation Over the Temperature Range of 40 to 100 Degrees Centigrade (Final Report)

著录项

引文网络

相似文献

相关主题

期刊订阅