首页> 外文OA文献 >Output tracking via sliding modes in causal systems with time delay modeled by higher order pade approximations
【2h】

Output tracking via sliding modes in causal systems with time delay modeled by higher order pade approximations

机译:通过具有时间延迟的因果系统中的滑动模式的输出跟踪由高阶pade近似建模

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Output tracking in a SISO causal uncertain nonlinear system with an output subject to a time delay is considered using sliding mode control. A higher order Pade approximation to a delay function with a known time delay is used to construct a model of a transformed system without a time delayed output and is employed in a feedback sliding mode control. This model functions as a predictor of the plant states and the plant output, but is of nonminimum phase due to the application of the Pade approximation. The method of the stable system center is used to stabilize the internal dynamics of this plant model, and a control is developed using a sliding surface to allow the plant to track an arbitrary reference profile given by an exogenous system with a known characteristic equation. Simulations of the system are performed for the plant model using a first, second and third order Pade approximations and a controller in plant feedback mode. Numerical examples for Pade approximations of increasing order are considered and comparedudud
机译:使用滑模控制,可以考虑在SISO因果不确定非线性系统中进行输出跟踪,其中输出受时间延迟的影响。使用具有已知时间延迟的延迟函数的高阶Pade近似来构建没有时间延迟输出的变换系统模型,并将其用于反馈滑模控制。该模型可作为工厂状态和工厂产量的预测器,但由于应用了Pade逼近,因此处于非最小相位。稳定系统中心的方法用于稳定此工厂模型的内部动力学,并使用滑动表面开发控件,以允许工厂跟踪具有已知特征方程的外源系统给定的任意参考轮廓。在工厂反馈模式下,使用一阶,二阶和三阶Pade近似值和控制器针对工厂模型执行系统仿真。考虑并比较了递增阶数的Pade逼近的数值示例 ud ud

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号