首页> 外文OA文献 >Synthesis of SiC nanowires via catalyst-free pyrolysis of silicon-containing carbon materials derived from a hybrid precursor
【2h】

Synthesis of SiC nanowires via catalyst-free pyrolysis of silicon-containing carbon materials derived from a hybrid precursor

机译:通过无催化剂热解来自混合前体的含硅碳材料合成siC纳米线

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

SiC nanowires were successfully synthesized without catalyst by pyrolysis of silicon-containing pitch-derived carbon materials in a closed graphite crucible. These silicon-containing carbon materials were obtained by homogenization and co-carbonization of a hybrid precursor consisting of the toluene soluble fraction of coal tar pitch with polycarbosilane (PCS). The composition, morphology and structure of the nanowires were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The influence of pyrolysis temperature on the growth of the nanowires was investigated by Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetry coupled with mass spectroscopy (TG-MS) analysis. The results indicate that the growth of the SiC nanowires starts at around 1200 °C. As the pyrolysis temperature increases to 1300–1500 °C, a large quantity of nanowires are formed on the top surface of the pitch-derived carbon substrate. In addition, increasing the pyrolysis temperature leads to an increase in the average diameter and a change in the typical morphology produced. The synthesized SiC nanowires have single-crystalline structure and are grown along the [111] direction with numerous stacking faults and twins. The vapor-solid (VS) mechanism may be responsible for the growth process of the SiC nanowires.
机译:通过在封闭的石墨坩埚中热解含硅的沥青衍生碳材料成功地合成了无催化剂的SiC纳米线。通过将由煤焦油沥青的甲苯可溶级分与聚碳硅烷(PCS)组成的杂化前驱体进行均质化和共碳化,可获得这些含硅碳材料。通过X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM)和选择区域电子衍射(SAED)对纳米线的组成,形态和结构进行了表征。通过傅里叶变换红外光谱(FTIR)和热重分析与质谱(TG-MS)分析,研究了热解温度对纳米线生长的影响。结果表明,SiC纳米线的生长始于1200°C左右。随着热解温度升高到1300–1500°C,在源自沥青的碳基板的顶面上会形成大量的纳米线。另外,增加热解温度导致平均直径的增加和所产生的典型形态的改变。合成的SiC纳米线具有单晶结构,并沿[111]方向生长,具有许多堆叠缺陷和孪晶。气固(VS)机制可能是SiC纳米线的生长过程的原因。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号