A PLL Exploiting Sub-Sampling of the VCO Output to Reduce In-band Phase Noise

摘要

Abstract— In this paper, we present a 2.2-GHz low jitter PLL based on sub-sampling. It uses a phase-detector/charge-pump (PD/CP) that sub-samples the VCO output with the reference clock. In contrast to what happens in a classical PLL, the PD/CP noise is not multiplied by N2 in this sub-sampling PLL. Moreover, no frequency divider is needed in the locked state and hence divider noise and power can be eliminated. A frequency locked loop guarantees correct frequency locking without degenerating jitter performance. The PLL implemented in a standard 0.18-μm CMOS process consumes 4.2 mA from a 1.8 V supply and occupies an active area of 0.4 × 0.45 mm2. The in-band phase noise at 200 kHz offset is measured to be -126 dBc/Hz and the rms PLL output jitter integrated from 10 kHz to 40 MHz is 0.15 ps.