首页> 外文OA文献 >Preparation of Ce-modified Raney Ni Catalysts and Their Application in Aqueous-Phase Reforming of Cellulose
【2h】

Preparation of Ce-modified Raney Ni Catalysts and Their Application in Aqueous-Phase Reforming of Cellulose

机译:preparation of Ce-modified Raney Ni Catalysts and Their application in aqueous-phase Reforming of Cellulose

摘要

A series of Ce-modified Raney Ni (RNi) catalysts were successfully prepared by a simple wet chemical route and employed in aqueous-phase reforming of cellulose. Remarkable enhancement in hydrogen selectivity and yield after the Ce introduction was observed. At 533 K and autogenous pressure, a highest hydrogen yield of 17.8 mmol/g(cellulose), which was comparable with that of 5 wt% Pt/AC, could be obtained over Ce-modified catalyst at a Ce:Ni ratio of 0.054. The catalysts were characterized by N-2 adsorption/desorption, XRD, SEM, XPS and H-2-TPD. It was found that cerium existed at the surface of the catalyst as Ce(OH)(3), and more defects were generated during Ce modification. Based on the characterization and catalytic performance, it was suggested that the deposited Ce(OH)(3) may transform into reducible CeO2 under the reaction conditions, thus promoting the desired water-gas shift reaction, leading to more H-2. On the other hand, the active sites for undesired methanation reaction may be effectively poisoned by Ce modification, thus leading to less undesired methane.
机译:通过简单的湿化学路线成功制备了一系列Ce修饰的阮内镍(RNi)催化剂,并将其用于纤维素的水相重整。引入铈后,观察到氢选择性和产率的显着提高。在Ce:Ni为0.054的Ce改性催化剂上,在533 K和自生压力下,最高氢气产率为17.8 mmol / g(纤维素),与5 wt%Pt / AC相当。通过N-2吸附/解吸,XRD,SEM,XPS和H-2-TPD对催化剂进行了表征。发现铈以Ce(OH)(3)存在于催化剂表面,并且在Ce改性期间产生更多的缺陷。根据表征和催化性能,建议在反应条件下沉积的Ce(OH)(3)可以转化为可还原的CeO2,从而促进所需的水煤气变换反应,从而导致更多的H-2。另一方面,用于不希望的甲烷化反应的活性位点可以通过Ce改性而有效地中毒,从而导致更少的不希望的甲烷。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号