首页> 外文OA文献 >The Investigation of the Abrasive Wear Performance of Cermet Coatings Produced by Electric Arc Spraying Technique

【2h】

The Investigation of the Abrasive Wear Performance of Cermet Coatings Produced by Electric Arc Spraying Technique

机译：电弧喷涂技术制备金属陶瓷涂层磨料磨损性能的研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

FeCrCMn alaşım kaplamalar şiddetli abrazif aşınmaya maruz kalan parçalara abrazif aşınma direnciudkazandırmak için yaygın olarak uygulanmaktadır. Elektrik ark püskürtme kaplama tekniği termaludpüskürtme yöntemleri arasında en uygun uygulama ve maliyet avantajlı yöntemdir. Bu çalışmadaudelektrik ark püskürtme kaplama tekniği ile üretilmiş FeCrCMn kaplamalar, optik mikroskop, SEMudincelemesi yapılmış olup mikrosertlikleri ölçülmüştür. Fazların tayini için EDS ve XRD analizleriudgerçekleştirilmiştir. ASTM G65-04’e gore 13 Cr’lu çelik kaplama ile aşınma performanslarıudkarşılaştırılmıştır.

机译：FeCrCMn合金涂层被广泛应用于对遭受严重磨蚀的零件提高抗磨蚀性。电弧喷涂技术是热喷涂法中最合适的应用，也是一种经济有效的方法。在这项研究中，进行了用电弧喷涂技术，光学显微镜，SEM分析生产的FeCrCMn涂层，并测量了它们的显微硬度。进行EDS和XRD分析以确定相。根据ASTM G65-04，将耐磨性能与13 Cr钢涂层进行了比较。

著录项

作者
Güleç Ahmet; Türk Ahmet; Üstel Fatih;
展开▼
作者单位

展开▼
年度 2014
总页数
原文格式 PDF
正文语种 tur
中图分类

相似文献

外文文献
中文文献
专利

1. Two-Body Dry Abrasive Wear Performance of High Velocity Oxygen Fuel Spray Process and Electrodeposited Cermet Coatings [J] . Nur Amira MOHD RABANI, Zakiah KAMDI Materials science forum . 2017,第期

机译：高速氧气燃料喷涂工艺和电沉积金属陶瓷涂层的二体干式磨料磨损性能
2. Comparative Abrasive Wear Study of HVOF Coatings Obtained by Spraying WC-17Co Microcrystalline and Duplex Near-Nanocrystalline Cermet Powders [J] . G. C. Saha, T. I. Khan Journal of engineering materials and technology . 2011,第4期

机译：通过喷涂WC-17Co微晶和双近纳米晶金属陶瓷粉末获得的HVOF涂层的比较磨料研究
3. Abrasive wear behavior of Ni(Cr)-TiB{sub}2 coatings deposited by HVOF spraying of SHS-derived cermet powders [J] . B. Lotfi, P. H. Shipway, D. G. McCartney, Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 2003,第3a4期

机译：HVOF喷涂SHS衍生的金属陶瓷粉末沉积的Ni（Cr）-TiB {sub} 2涂层的磨损性能
4. Microstructure and abrasive wear behaviour of HVOF sprayed carbide-based cermet coatings [C] . Hongtao Wang, Gangchang Ji, Qinyu Chen, International Conference on Mechatronics and Intelligent Materials . 2011

机译：HVOF喷涂碳化物基金属陶瓷涂料的组织及磨料磨损行为
5. Microstructural Characteristics and Mechanical Behavior of Anticorrosive Al-Zn Thermal Spray Coatings Deposited by Wire Arc Spraying and Cold Spraying Techniques [D] . Noferesti, Amir Darabi. 2019

机译：电弧喷涂和冷喷涂技术沉积的抗腐蚀性Al-Zn热喷涂涂层的微观结构特征和力学行为
6. Effects of Cr and Zr Addition on Microstructures Compressive Properties and Abrasive Wear Behaviors of In Situ TiB2/Cu Cermets [O] . Feng Qiu, Xiangzheng Duan, Baixin Dong, 2018

机译：Cr和Zr的添加对原位TiB2 / Cu金属陶瓷显微组织压缩性能和磨粒磨损行为的影响
7. Wear Behaviour of Cermet Coatings Deposited by Different Thermal Spray Techniques: A Review [O] . 2016

机译：不同热喷涂技术沉积的金属陶瓷涂层的磨损行为：综述

The Investigation of the Abrasive Wear Performance of Cermet Coatings Produced by Electric Arc Spraying Technique

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅