首页> 外文OA文献 >Improvement in the environmental stability of tris(8-hydroxyquinoline) aluminum by substitution of sulphonic acid in 8-hydroxyquinoline ligand
【2h】

Improvement in the environmental stability of tris(8-hydroxyquinoline) aluminum by substitution of sulphonic acid in 8-hydroxyquinoline ligand

机译:通过取代8-羟基喹啉配体中的磺酸改善三(8-羟基喹啉)铝的环境稳定性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Tris (8-hydroxyquinoline) aluminum (Alq 3) is a commonly used electron transporting and/or light emitting material in organic light emitting diodes (OLEDs). However, it is well known that Alq 3 is very sensitive to atmosphere exposure and that photoluminescence of Alq 3 films decreases with the time of atmosphere exposure. Degradation is also a serious problem in Alq 3 based OLEDs. Several degradation mechanisms have been identified in these devices, including formation of unstable cationic species due to passage of holes. Therefore, there is lots of interest in improving the stability of Alq 3. We have synthesized Tris (8-hydroxyquinoline-5 sulphonic acid) aluminum (Al(qS) 3) in order to improve the stability. We performed electron spin resonance measurements on Alq 3 and Al(qS) 3 powders. Unlike Alq 3 which exhibited strong ESR signal, Al(qS) 3 produced no detectable ESR signal indicating absence of free radicals in this material. To test the environmental stability of Al(qS) 3 films, we have performed photoluminescence (PL) measurements in humid air at different temperatures and found that Al(qS) 3 exhibits improved stability. After comparing the stability of Alq 3 and Al(qS) 3 thin films, fabrication of the light emitting diodes with Al(qS) 3 emitting layer was attempted in order to compare the performance with Alq 3 based devices.
机译:三(8-羟基喹啉)铝(Alq 3)是有机发光二极管(OLED)中常用的电子传输和/或发光材料。然而,众所周知,Alq 3对暴露于大气非常敏感,并且Alq 3膜的光致发光随暴露于大气的时间而降低。在基于Alq 3的OLED中降解也是一个严重的问题。在这些装置中已经确定了几种降解机理,包括由于空穴的通过而形成不稳定的阳离子物质。因此,对改善Alq 3的稳定性有很多兴趣。我们已经合成了Tris(8-羟基喹啉5磺酸)铝(Al(qS)3)以提高稳定性。我们对Alq 3和Al(qS)3粉末进行了电子自旋共振测量。与显示强ESR信号的Alq 3不同,Al(qS)3没有产生可检测到的ESR信号,表明该材料中不存在自由基。为了测试Al(qS)3膜的环境稳定性,我们在潮湿空气中在不同温度下进行了光致发光(PL)测量,发现Al(qS)3表现出更高的稳定性。在比较Alq 3和Al(qS)3薄膜的稳定性之后,尝试制造具有Al(qS)3发射层的发光二极管,以便与基于Alq 3的器件进行性能比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号