Effects of shear connectors on plate-reinforced composite coupling beams of short and medium-length spans

摘要

Experimental studies on the newly proposed design of plate-reinforced composite (PRC) coupling beams have been carried out. Previous results have demonstrated the useful application of this design in coupling beams of medium span-to-depth ratios (l/h) under both inelastic seismic and elastic wind loading. This paper presents further experimental studies on five PRC coupling beams, which investigated the importance of shear connectors on plate/reinforced concrete composite action. Three medium-length (l/h=2.5) and two short (l/h=1.17) PRC coupling beams, each containing a vertically embedded steel plate, were tested under reversed cyclic loading. While one short beam was welded with expanded metal meshes on the plate surfaces, others were welded with shear studs on the plates in the wall regions and/or the beam spans. Results showed that the expanded metal meshes did not work effectively, and while the shear studs in the beam span only slightly increased the beam capacity, those in the wall regions contributed considerably in improving inelastic beam performance. © 2005 Elsevier Ltd. All rights reserved.