present day accelerator science. The bERLinPro project is presently being built at HZB to address the challenges involved in high current SRF machines with the goal of generating and accelerating a 100 mA electron beam to 50 MeV in continuous wave cw mode at 1.3 GHz. One of the main challenges in this project is that of handling the high input RF power required for the photo injector as well as booster cavities where there is no energy recovery process. A high power co axial input power coupler is being developed to be used for the photo injector and booster cavities at the nominal beam current. The coupler is based on the KEK cERL design and has been modified to minimise the penetration of the coupler tip in the beam pipe without compromising on beam power coupling Qext 105 . Herein we report on the RF design of the high power 115 kW per coupler, dual couplers per cavity bERLinPro BP coupler along with initial results on thermal calculations. We summarise the RF conditioning of the TTF III couplers modified for cw operation performed in the past at BESSY HZB. A similar conditioning is envisaged in the near future for the low current SRF photo injector and the bERLinPro main linac cryomodule.
展开▼
