On the signum function and its effect on acoustic correlation for leak location in buried plastic water pipes

摘要

the recent problem faced by São Paulo State in Brazil. Although older metallic pipes are now being replaced by plastic pipes they still suffer from leakage. Unfortunately, correlation techniques, which are used to locate leaks by correlating signals from two vibration sensors attached to the pipe, are less effective in plastic pipes because of higher leak noise attenuation. Hence, the gain setting of the sensorsused to collect leak signals haveto be carefully selected to enhance the effectiveness of correlation techniques when applied to plastic pipes. However, this is not simple in practical situations, so that the acquired data can become saturated (clipped) or be very small. This paper describes the effects of clipping on the estimation of time delay by severely distorting the signals by using the signum function. It transpires, that although this adds some noise to the original signals, and potentially reduces the bandwidth of which there are measurable leak noise signals, it does not have a profound effect on time delay estimation and hence the accuracy of the leak location. Leak noise signals measured in controlled conditions on a bespoke test-rig constructed by South Staffs Water plc, are used to demonstrate how this process works.