首页> 外文OA文献 >Observer-based open transistor fault diagnosis and fault-tolerant control of five-phase permanent magnet motor drive for application in electric vehicles
【2h】

Observer-based open transistor fault diagnosis and fault-tolerant control of five-phase permanent magnet motor drive for application in electric vehicles

机译:基于观测器的开放式晶体管故障诊断及五相永磁电机驱动的容错控制在电动汽车中的应用

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

To meet increasing demand for higher reliability in power electronics converters applicable in electric vehicles, fault detection (FD) is an important part of the control algorithm. In this study, a model-based open transistor fault diagnsosis method is presented for a voltage-source inverter (VSI) supplying a five-phase permanent magnet motor drive. To realise this goal, a model-based observer is designed to estimate model parameters. After that, the estimated parameters are used to design a sliding mode observer in order to estimate the phase current in an ideal model. Subsequently, the proposed FD technique measures the similarity between the estimated current and real current using cross-correlation factor. This factor is used for the first time in this study to define a FD index in VSI. The presented FD scheme is simple and fast; also, it is able to detect multiple open switch or open phase faults in contrast to conventional methods. On the other side, in order to track reference current of the motor, the estimated parameters are used to design a proportional resonant controller. The FD technique is used to operate a multiphase fault-tolerant brushless direct current (BLDC) motor drive. Experimental results on a five-phase BLDC motor with in-wheel outer rotor applicable in electrical vehicles are conducted to validate the theory.
机译:为了满足适用于电动汽车的电力电子转换器对更高可靠性的不断增长的需求,故障检测(FD)是控制算法的重要组成部分。在这项研究中,提出了一种基于模型的开路晶体管故障诊断方法,用于为五相永磁电动机驱动器供电的电压源逆变器(VSI)。为了实现这个目标,设计了一个基于模型的观察者来估计模型参数。之后,估计的参数用于设计滑模观察器,以便估计理想模型中的相电流。随后,提出的FD技术使用互相关因子来测量估计电流和实际电流之间的相似性。该因子在本研究中首次用于定义VSI中的FD指数。提出的FD方案简单,快速;而且,与传统方法相比,它能够检测多个断路开关或断相故障。另一方面,为了跟踪电动机的参考电流,估计的参数用于设计比例谐振控制器。 FD技术用于操作多相容错无刷直流(BLDC)电动机驱动器。对带轮内转子的五相无刷直流电动机进行了实验,结果证明该理论是正确的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号