首页> 外文OA文献 >Photocatalytic membrane reactor for the removal of C.I. Disperse Red 73
【2h】

Photocatalytic membrane reactor for the removal of C.I. Disperse Red 73

机译:光催化膜反应器用于去除C.I.分散红73

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

After the dyeing process, part of the dyes used to color textile materials are not fixed into the substrate and are discharged into wastewater as residual dyes. In this study, a heterogeneous photocatalytic process combined with microfiltration has been investigated for the removal of C.I. Disperse Red 73 from synthetic textile effluents. The titanium dioxide (TiO2) Aeroxide P25 was selected as photocatalyst. The photocatalytic treatment achieved between 60% and 90% of dye degradation and up to 98% chemical oxygen demand (COD) removal. The influence of different parameters on photocatalytic degradation was studied: pH, initial photocatalyst loading, and dye concentration. The best conditions for dye degradation were pH 4, an initial dye concentration of 50 mg-1, and a TiO2 loading of 2 gL(-1). The photocatalytic membrane treatment provided a high quality permeate, which can be reused
机译:染色后,用于纺织材料着色的部分染料没有固定在基材上,而是作为残留染料排放到废水中。在这项研究中,已经研究了一种结合微滤的非均相光催化过程来去除C.I。从合成纺织品废液中分散红73。选择二氧化钛(TiO2)Aeroxide P25作为光催化剂。光催化处理可实现60%至90%的染料降解以及高达98%的化学需氧量(COD)去除。研究了不同参数对光催化降解的影响:pH,初始光催化剂负载量和染料浓度。染料降解的最佳条件是pH 4,初始染料浓度为50 mg-1和TiO2含量为2 gL(​​-1)。光催化膜处理提供了高质量的渗透物,可以重复使用

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号