首页> 外文OA文献 >Wind Turbine Blade Deflection Sensing System Based on UWB Technology
【2h】

Wind Turbine Blade Deflection Sensing System Based on UWB Technology

机译:基于UWB技术的风力机叶片挠度传感系统

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A microwave sensing system for estimating deflection of a wind turbine blade is presented. The system measures distances at two ultrawideband (UWB) wireless links between one antenna at the tip and two antennas at the root of the blade, which allows for determination of the tip position by triangulation. An experimental setup with corner reflector antenna mounted at the tip and horn antennas at the root of a 37.3 m long blade is described. Analyzing the data from the experiment, special attention is given to the propagation aspects of the UWB links, with focus on the multipath effects caused by the blade. It is demonstrated that despite the adverse effects of the multipath propagation the ranging accuracy of the system amounts to 1.5 cm, leading to maximum error of deflection 4.5 %.
机译:提出了一种用于估计风力涡轮机叶片的偏转的微波感测系统。该系统测量尖端的一个天线与刀片根部的两个天线之间的两条超宽带(UWB)无线链路的距离,从而可以通过三角测量确定尖端的位置。描述了一个实验装置,该装置的角反射器天线安装在叶尖,喇叭天线安装在37.3 m长的叶片根部。分析来自实验的数据,特别注意UWB链路的传播方面,重点是刀片引起的多径效应。已经证明,尽管多径传播有不利影响,系统的测距精度仍为1.5 cm,导致最大偏转误差为4.5%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号