Corrosion fatigue behaviour of aluminium alloy 6061-T651 welded using fully automatic gas metal arc welding and ER5183 filler alloy

摘要

The fatigue life of aluminium 6061-T651 at various applied stress amplitudes in the unwelded andwelded condition was found to be significantly reduced on immersion in a 3.5% NaCl simulated sea watersolution, compared to that measured in ambient air. The ratio of fatigue life in NaCl test solution to that inair increased as the stress amplitude decreased. The observed reduction in the fatigue life in the NaCl testsolution was most likely due to the presence of pits which nucleated on second phase particles or precipitates.Welded joints performed using pulsed gas metal arc welding and ER5183 filler wire failed at theinterface between the weld metal and the heat-affected zone as a result of a high pitting rate in thisregion.