首页> 外文OA文献 >An experimental study of the separated flow field about slender delta wings of triangular cross section
【2h】

An experimental study of the separated flow field about slender delta wings of triangular cross section

机译:三角形截面细长三角翼分离流场的实验研究

摘要

The separated flow about slender delta wings of shallow triangular cross section is investigated. The Brown and Michael theory is extended for this cross section and the solution is indicated. The limitations of this theory are pointed out. Computation becomes very complex and other methods such as electrostatic analog procedures appear preferable.Wind-tunnel tests were carried out on four delta wings with apex angle of 30? and triangular spanwise cross sections with flat base surfaces and included angles at the leading edges of 0, 10, 20, 30?, respectively. These tests were done in the 10-ft. GALCIT low-speed wind tunnel.Pressure measurements were taken at speeds up to 160 ft./sec. and Reynolds numbers up to 4 x 10 [superscript 6] based on the maximum chord of 4 ft. Experimental spanwise pressure distributions are compared to theoretical results for a delta wing of zero thickness (due to Brown and Michael). Experimental results show secondary vortices near the leading edges. These are not taken into account in the theory and so the theoretical and experimental pressure distributions differ markedly.However, the experimental spanwise local lift coefficient, which is obtained by integrating the spanwise pressure distribution, does agree very well with theoretical results. A simple geometrical definition for a corrected angle of attack makes it possible to plot local lift coefficients for the four wings on one curve.It is shown that the drag of the wings with triangular cross section including base drag is higher than that for wings of zero thickness. The results are applied to a brief analysis of the possibility of reducing lift-dependent drag of slender delta wings. It is shown that this drag reduction can be substantial (more than 10% ) for certain special cross sectional shapes.
机译:研究了浅三角形横截面的细长三角翼周围的分离流动。布朗和迈克尔理论对此截面进行了扩展,并指出了解决方案。指出了该理论的局限性。计算变得非常复杂,其他方法,例如静电模拟程序似乎更可取。风洞试验是在四个三角翼上进行的,顶角为30°。底面是平面的三角形和三角形展向横截面,前缘的夹角分别为0、10、20、30°。这些测试是在10英尺高的地方进行的。 GALCIT低速风洞。压力测量的最高速度为160英尺/秒。和基于4英尺最大弦的雷诺数最大为4 x 10 [上标6]。将翼展方向上的压力分布实验与零厚度三角翼的理论结果进行了比较(由于Brown和Michael)。实验结果表明,前缘附近存在次级涡旋。理论上没有考虑这些因素,因此理论压力分布和实验压力分布明显不同。但是,通过综合翼展方向压力分布获得的实验翼展方向局部升力系数与理论结果非常吻合。通过简单的几何定义来校正攻角,就可以在一条曲线上绘制四个机翼的局部升力系数,结果表明具有三角形横截面(包括基础阻力)的机翼的阻力要高于零翼的阻力。厚度。将结果应用于减少细长三角翼依赖于升力的阻力的可能性的简要分析。结果表明,对于某些特殊的横截面形状,这种减阻作用可能很大(超过10%)。

著录项

  • 作者

    Grellman Hans Werner;

  • 作者单位
  • 年度 1964
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号