首页> 外文OA文献 >Reconfigurable optical multiplexer based on liquid crystals for polymer optical fiber networks
【2h】

Reconfigurable optical multiplexer based on liquid crystals for polymer optical fiber networks

机译:基于液晶的可重构光复用器,用于聚合物光纤网络

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this work, different novel 3×1 multiplexer structures for being used in polymer optical fiber networks are proposed. Designs are compact, scalable, and of low consumption, capable of operating in a large wavelength range simultaneously 660, 850, and 1300 nm, due to the use of nematic liquid crystal cells. Light that comes from each input port is handled independently and eight operation modes are possible.Control electronics has been made using a programmable integrated circuit. Electronic system makes available the managing of the optical stage using a computer. An additional four optical sensors have been included for allowing the optical status checking.Finally, a polarization independent multiplexer has been implemented and tested. Insertion losses less than 4 dB and isolation better than 23 dB have been measured. In addition, 30-ms and 15-ms setup and rise times have been obtained. The proposed multiplexer can be used in any polymer optical fiber network, even in perfluorinated graded index one, and it can be specially useful in optical sensor networks, or in coarse wavelength division multiplexing networks.
机译:在这项工作中,提出了用于聚合物光纤网络的不同新颖的3×1多路复用器结构。设计紧凑,可扩展且消耗低,由于使用了向列液晶盒,因此能够同时在660、850和1300 nm的大波长范围内工作。每个输入端口发出的光均被独立处理,并且有八种工作模式。控制电子器件是使用可编程集成电路制成的。电子系统可以使用计算机来管理光学平台。另外还包括四个光学传感器,用于进行光学状态检查。最后,偏振独立多路复用器已经实现并经过测试。测量的插入损耗小于4 dB,隔离度大于23 dB。另外,已经获得了30 ms和15 ms的建立和上升时间。所提出的多路复用器可用于任何聚合物光纤网络,甚至可用于全氟化渐变指数光纤,并且在光传感器网络或粗波分多路复用网络中特别有用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号