The surface finishes of laminates produced by Quickstep™ and autoclave processes for use in automotive outer skin panels were compared. Automotive quality, painted carbon fibre samples, manufactured via both processes, were exposed to typical exposure environments including combinations of temperature (70, 120, 170°C), UV-B, humidity (95% RH) and immersion in water.The microscopy and surface roughness results demonstrated that the surfaces produced by the Quickstep process were less susceptible to damage in the aging environments than the surfaces of the autoclaved samples. Quickstep samples displayed surface bubbling of only 5 μm, compared to the autoclaved surface bubbles which reached a diameter of 30 mm before bursting, with complete delamination occurring between the paint and the composite. The surface roughness measurements revealed the autoclave samples (Ra = 0.72 μm) were up to three times the roughness of the Quickstep samples (Ra = 0.23 μm).
展开▼
