首页> 外文OA文献 >Nanoindentation Study of Na-Geopolymers Exposed to High Temperatures

【2h】

Nanoindentation Study of Na-Geopolymers Exposed to High Temperatures

机译：纳米地质聚合物在高温下的纳米压痕研究

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
I. Beleña; W. Zhu;
展开▼
作者单位

展开▼
年度 2014
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. FIBER PUSH-OUT NANOINDENTATION STUDY OF BN INTERFACE IN SIC/SIC COMPOSITES EXPOSED TO HIGH TEMPERATURES [J] . Eric Jones, Sergey Yarmolenko, Jag Sankar Ceramic Engineering and Science Proceedings . 2006,第2期

机译：高温下SIC / SIC复合材料中BN界面的纤维挤出纳米取向研究
2. A nanoindentation study of Ti-based high entropy bulk metallic glasses at elevated temperatures Comment [J] . Zhou Qing, Du Yin, Jia Qian, Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites . 2020,第1期

机译：高温评论中Ti基高熵散装金属玻璃的纳米凸缘研究
3. Nanoindentation study of bulk zirconium hydrides at elevated temperatures [J] . M. Nedim Cinbiz, Mehdi Balooch, Xunxiang Hu, Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics . 2017,第期

机译：升高温度下硫锆含量的纳米indentation研究
4. FIBER PUSH-OUT NANOINDENTATION STUDY OF BN INTERFACE IN SIC/SIC COMPOSITES EXPOSED TO HIGH TEMPERATURES [C] . Eric Jones, Sergey Yarmolenko, Jag Sankar International Conference on Advanced Ceramics and Composites . 2007

机译：纤维推出纳米indentation在高温下的SiC / SiC复合材料中的BN界面
5. Phase Transformations and Chemical Interactions in Materials Exposed to High Temperatures [D] . Guo, Jicheng. 2018

机译：暴露于高温材料的相变和化学相互作用
6. Comparison study of silicon carbide coatings produced at different deposition conditions with use of high temperature nanoindentation [O] . Nadia Rohbeck, Dimitrios Tsivoulas, Ian P. Shapiro, -1

机译：使用高温纳米压痕在不同沉积条件下生产的碳化硅涂层的比较研究
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Incipient Plasticity During Nanoindentation at Elevated Temperatures. [R] . A. C. Lund A. M. Hodge C. A. Schuh 2004

机译：高温纳米压痕过程中的初始可塑性。

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

客服微信
服务号