首页> 外文OA文献 >INVESTIGATION OF STRESSES IN THE THIN RIMMED SPUR GEAR TOOTH USING FEM

【2h】

INVESTIGATION OF STRESSES IN THE THIN RIMMED SPUR GEAR TOOTH USING FEM

机译：用有限元法研究薄边齿轮齿面的应力

页面导航

著录项
相似文献
相关主题

著录项

作者
Jaya. S. Kailuke; Y. L. Yenarkar;
展开▼
作者单位

展开▼
年度 2015
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effects of centrifugal load on tooth contact stresses and bending stresses of thin-rimmed spur gears with inclined webs [J] . Shuting Li Mechanism and Machine Theory: Dynamics of Machine Systems Gears and Power Trandmissions Robots and Manipulator Systems Computer-Aided Design Methods . 2013 ,第Null期

机译：离心载荷对倾斜腹板薄齿正齿轮齿接触应力和弯曲应力的影响
2. Static load sharing by tooth pairs in contact in internal involute spur gearing with thin rimmed pinion [J] . Sahoo Vineet, Maiti Rathindranath Proceedings of the Institution of Mechanical Engineers, Part C. Journal of mechanical engineering science . 2016 ,第4期

机译：带有渐开线小齿轮的内部渐开线正齿轮中接触的齿对共享静载荷
3. Static load sharing by tooth pairs in contact in internal involute spur gearing with thin rimmed pinion (vol 230, pg 485, 2016) [J] . Sahoo Vineet, Maiti Rathindranath Proceedings of the Institution of Mechanical Engineers, Part C. Journal of mechanical engineering science . 2016 ,第7a8期

机译：带有渐开线小齿轮的内部渐开线正齿轮中接触的齿对的静载荷分担（vol 230，pg 485，2016）
4. Effects of Carburized Parts on Residual Stresses of Thin-Rimmed Spur Gears with Symmetric Web Arrangements Due to Case-Carburizing [C] . Kouitsu Miyachika, Wei-Dong Xue, Satoshi Oda Congress of International Federation for Heat treatment and Surface Engineering . 2004

机译：渗碳零件对薄衬里试齿轮的剩余应力因对称网布置而导致的薄膜渗碳
5. Tooth profile modifications for optimum dynamic load in spur gears based on pseudo-interference stiffness estimation method. [D] . Pimsarn, Monsak. 2005

机译：基于伪干涉刚度估算方法的正齿轮最佳动载荷齿廓修正。
6. Research on the sliding friction associated spur-face gear meshing efficiency based on the loaded tooth contact analysis [O] . Hao Dong, Zhi-Yu Liu, Ling-ling Duan, 2012

机译：基于载荷齿接触分析的滑动摩擦关联正齿轮啮合效率研究
7. Study on Stresses at the Root Fillet of Tooth, Deformation and Accuracy Drop of Spur Gears with a Thin Rim in Case When Load Distribution under Dynamic Condition is Considered [O] . Norihisa ARAI, Susumu HARADA, Natsuhiko MORI, 1984

机译：考虑了动态条件下载荷分布时，薄边缘齿根圆角牙螺栓牙根，变形和精度下降的应力研究
8. Determination of Bending Stresses in a Spur Gear Tooth [R] . Bunakov, Y. N. 1977

机译：直齿轮齿弯曲应力的测定

INVESTIGATION OF STRESSES IN THE THIN RIMMED SPUR GEAR TOOTH USING FEM

著录项

相似文献

相关主题

期刊订阅