首页> 外文OA文献 >The Numerical Simulation of Non-Supercell Tornadogenesis. Part III: Parameter Tests Investigating the Role of CAPE, Vortex Sheet Strength and Boundary Layer Vertical Shear

【2h】

The Numerical Simulation of Non-Supercell Tornadogenesis. Part III: Parameter Tests Investigating the Role of CAPE, Vortex Sheet Strength and Boundary Layer Vertical Shear

机译：非超级细胞色生成的数值模拟。第三部分：参数测试研究CapE，涡旋板强度和边界层垂直剪切的作用

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Bruce Lee Department; Bruce D. Lee; Robert B. Wilhelmson;
展开▼
作者单位

展开▼
年度 1996
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献

1. The numerical simulation of nonsupercell tornadogenesis. Part III: Parameter tests investigating the role of CAPE, vortex sheet strength, and boundary layer vertical shear [J] . Lee BD., Wilhelmson RB. Journal of the Atmospheric Sciences . 2000,第14期

机译：非超细胞撕裂发生的数值模拟。第三部分：参数测试，研究CAPE，涡流片强度和边界层垂直剪切的作用
2. Numerical investigation of parameters influencing debonding of FRP sheets in shear-strengthened beams [J] . Esfandiari M. J., Bondarabadi H. Rahimi, Sheikholarefin S., European Journal of Environmental and Civil Engineering . 2018,第1a2期

机译：影响剪切强化梁FRP薄板剥离的参数的数值研究
3. Experimental and numerical simulation investigation on vortex-induced vibration test system based on bare fiber Bragg grating sensor technology for vertical riser [J] . Chunxiao Wang, Yu Wang, Yu Liu, International Journal of Naval Architecture and Ocean Engineering . 2021,第a期

机译：基于裸纤维布拉格光栅传感器技术的垂直提升机涡旋振动试验系统的实验性和数值模拟研究
4. Numerical simulation of the marine atmospheric boundary layer flow over the Cape Canaveral region and Gulf Stream using AVHRR SST - an atmospheric Seabreeze model [C] . Charles R. Bostater, M. Gimond, E. Uhlhorn, Conference on Remote Sensing of the Ocean and Sea Ice 2000, Sep 28-29, 2000, Barcelona, Spain . 2000

机译：使用AVHRR SST-大气海风模型对卡纳维拉尔角地区和墨西哥湾流上海洋大气边界层流动的数值模拟
5. A numerical investigation of airfoil boundary layer using large eddy simulations [D] . Xu, Tao 2008

机译：大型涡模拟对翼型边界层的数值研究
6. Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test [O] . Jung Gi Kim, Jae Wung Bae, Jeong Min Park, -1

机译：用原位中子衍射拉伸试验研究层状钢板的协同强化
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Investigation of Numerical Schemes for Direct Numerical Simulations of Supersonic Turbulent Boundary Layers. [R] . Morris, C. I. 2015

机译：超音速湍流边界层直接数值模拟数值方案研究。

The Numerical Simulation of Non-Supercell Tornadogenesis. Part III: Parameter Tests Investigating the Role of CAPE, Vortex Sheet Strength and Boundary Layer Vertical Shear

著录项

引文网络

相似文献

相关主题

期刊订阅