首页>
外文OA文献
>Characterization of AZO and Ag based films prepared by RF magnetron sputtering
【2h】
Characterization of AZO and Ag based films prepared by RF magnetron sputtering
展开▼
机译:射频磁控溅射制备的基于AZO和Ag的薄膜的表征
展开▼
免费
页面导航
摘要
著录项
引文网络
相似文献
相关主题
摘要
Ag, AZO/Ag, Ag/AZO and AZO/Ag/AZO films were prepared on glass substrates by radio frequency (RF) magnetron sputtering technology. The prepared films were systematically investigated by X-ray Diffraction (XRD), Atomic Force Microscopy (AFM), UV-visible spectrophotometer, a four-point probe system and Fourier Transform Infrared Spectroscopy. The results indicated that Ag inner layer starts forming a continuous film at the thickness of 10 nm and Ag layer presents superior crystallization on AZO substrate than that on glass substrate. The continuous Ag inner layer film provided the highest average visible transmittance of 85.4% (AZO/Ag/AZO). The lowest sheet resistance of 3.21 Ω/sq and the highest infrared reflection rate of 97% in FIR region can be obtained on AZO/Ag (15 nm)/AZO film. The high infrared reflection property of the AZO/Ag/AZO coating makes it a promising candidate for solar control films.
展开▼
机译:通过射频(RF)磁控溅射技术在玻璃基板上制备了Ag,AZO / Ag,Ag / AZO和AZO / Ag / AZO膜。通过X射线衍射(XRD),原子力显微镜(AFM),紫外可见分光光度计,四点探针系统和傅里叶变换红外光谱对系统制备的薄膜进行了系统研究。结果表明,Ag内层开始以10nm的厚度形成连续膜,并且Ag层在AZO基板上呈现出比在玻璃基板上更好的结晶。连续的银内层膜提供最高的平均可见光透射率85.4%(AZO / Ag / AZO)。在AZO / Ag(15 nm)/ AZO膜上可以得到最低的薄层电阻3.21Ω/ sq和最高的红外反射率(在FIR区域中为97%)。 AZO / Ag / AZO涂层的高红外反射特性使其成为阳光控制膜的有希望的候选者。
展开▼