首页> 外文OA文献 >Modeling and fouling mechanisms for ultrafiltration of Huanggi (Radix astragalus) extracts
【2h】

Modeling and fouling mechanisms for ultrafiltration of Huanggi (Radix astragalus) extracts

机译:黄芪提取物超滤的建模和结垢机理

摘要

A semi-empirical model has been developed in ultrafiltration of huanggi (Radix astragulus) extracts. Three major fouling resistances were quantified with transmembrane pressure (TMP) ranged from 0. 4 to 0. 8 bar and process time lasted for 120 min. Adsorption grew fast at the initial 15 min and its contribution was more significant at 0. 4 bar, nearly 50%. Pore blocking almost kept the same values of 1. 28, 1. 84, and 2. 39 at pressures of 0. 4, 0. 6, and 0. 8 bar, respectively. Cake layer grew linearly at 0. 4 bar but it increased rapidly as the TMP arose. With the TMP increased, the contribution of cake layer became more significant, almost 75% at 0. 8 bar which was triple of that at 0. 4 bar. Prediction of flux decline fitted quite well with the experimental data, all within 5% errors. It demonstrates that adsorption, pore blocking, and cake layer are the main mechanisms for membrane fouling during the process.
机译:在黄gi提取物的超滤过程中,已经建立了一个半经验模型。用跨膜压力(TMP)在0. 4至0. 8 bar范围内量化了三个主要的防污性,处理时间持续了120分钟。在开始的15分钟内,吸附迅速增长,在0. 4 bar时,其贡献更为显着,接近50%。毛孔阻塞在0、4、0、6和0.8 bar的压力下几乎保持相同的1. 28、1。84和2. 39值。滤饼层在0. 4 bar处线性增长,但随着TMP的出现迅速增加。随着TMP的增加,滤饼层的贡献变得更加显着,在0. 8巴时几乎达到75%,是在0. 4巴时的三倍。通量下降的预测与实验数据非常吻合,所有误差均在5%以内。它表明吸附,孔堵塞和滤饼层是该过程中膜结垢的主要机理。

著录项

  • 作者

    Cai M; Wang S; Liang H;

  • 作者单位
  • 年度 2013
  • 总页数
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号