首页> 外文OA文献 >Dynamic analysis of a flexible manipulator with passive constrained layer damping
【2h】

Dynamic analysis of a flexible manipulator with passive constrained layer damping

机译:具有被动约束层阻尼的柔性机械臂的动力学分析

摘要

This paper studies the vibration behavior of a flexible manipulator with passive constrained layer damping (PCLD) treatment. The manipulator rotates in a vertical plane and carries an end mass. Due to the highly nonlinear and coupled characteristics of the beam with PCLD treatment, “relative description” method is used to define the motions of the manipulator system. Using Lagrange’s equation and Rayleigh-Ritz method, the dynamic model of the manipulator is obtained and its vibration response is analyzed in the time domain. By assuming finite element shape functions as the displacement shape functions and using the complex damping model for the visco-elastic material (VEM) layer, the number of degrees of freedom of the system or the model dimension is greatly reduced. Numerical simulations show that the VEM not only reduces the amplitude of the elastic deflection but also quickly attenuates the vibration to zero. Also, it is confirmed that the geometry and physical properties of the PCLD treatment have significant effects on the dynamic response of the manipulator.
机译:本文研究了采用被动约束层阻尼(PCLD)处理的柔性机械臂的振动行为。机械手在垂直平面中旋转并承载末端质量。由于经过PCLD处理的光束具有高度的非线性和耦合特性,因此使用“相对描述”方法来定义机械手系统的运动。使用拉格朗日方程和Rayleigh-Ritz方法,获得机械手的动力学模型,并在时域内分析其振动响应。通过假定有限元形状函数作为位移形状函数,并使用粘弹性材料(VEM)层的复杂阻尼模型,系统的自由度或模型尺寸的数目将大大减少。数值模拟表明,VEM不仅减小了弹性变形的幅度,而且还迅速将振动衰减为零。另外,已经证实,PCLD处理的几何形状和物理性质对操纵器的动态响应具有显着影响。

著录项

  • 作者

    Zou JQ; Fung EHK; Lee HWJ;

  • 作者单位
  • 年度 2003
  • 总页数
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号