首页> 外文OA文献 >Numerical Study for Optimum Parameters of Bonded Composite Repairs of Cracked Aluminum
【2h】

Numerical Study for Optimum Parameters of Bonded Composite Repairs of Cracked Aluminum

机译:裂纹铝粘结复合修复最佳参数的数值研究。

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This thesis used Finite Element Analysis to model a cracked aluminum panel repaired with a bonded composite patch using the minimization of energy release rate in mode I crack growth conditions to determine effectiveness of a patch. The first phase of the study was to understand the mechanics of the effects of asymmetric or one-sided patching for both flat and curved geometries. The out of plane deflection that occurs due to one sided patching had a significant effect. Phase two studied the relationship between patch and base plate stiffness and patch and base plate thickness using orthotropic patch characteristics. Phase two provides general target patch design guidelines that could be used by technicians performing the repair. The third phase studied the effects of varying specific patch design parameters such as patch length and patch width applied to flat plate and curved geometries to provide specific design parameters to use in achieving general patch requirements determined from phase two of this study.
机译:本文使用有限元分析法对通过粘结复合补片修复的开裂铝板进行建模,并使用I型裂纹扩展条件下的能量释放速率最小化来确定补片的有效性。研究的第一阶段是了解平面和曲面几何形状的非对称或单面修补效果的机理。由于一侧修补而发生的面外偏转具有显着影响。第二阶段使用正交各向异性贴片特性研究了贴片和基板刚度以及贴片和基板厚度之间的关系。第二阶段提供了一般目标补丁设计指南,可供执行修复的技术人员使用。第三阶段研究了变化的特定贴片设计参数(例如应用于平板和弯曲几何形状的贴片长度和贴片宽度)的影响,以提供特定的设计参数,以用于实现本研究第二阶段确定的通用贴片要求。

著录项

  • 作者

    McGee Aaron S.;

  • 作者单位
  • 年度 2012
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号