首页> 外文OA文献 >Linear structural stress analysis of a hull girder penetration and a short longitudinal bulkhead using finite element modeling.

【2h】

Linear structural stress analysis of a hull girder penetration and a short longitudinal bulkhead using finite element modeling.

机译：使用有限元建模对船体大梁穿透和纵向短舱壁进行线性结构应力分析。

页面导航

摘要
著录项
相似文献
相关主题

摘要

Approved for public release; distribution unlimited.

机译：批准公开发布；分布无限。

著录项

作者
Baumann Gregg W.;
展开▼
作者单位

展开▼
年度 1997
总页数
原文格式 PDF
正文语种 en_US
中图分类

相似文献

外文文献
中文文献
专利

1. Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - A case study Part 1: Nonlinear finite element modelling and ultimate hull girder capacity [J] . Hadi K.K. Amlashi, Torgeir Moan Marine Structures . 2008,第4期

机译：交替保持载荷条件下散货船船体梁的极限强度分析-案例研究第1部分：非线性有限元建模和极限船体梁容量
2. Ultimate hull girder strength of a bulk carrier under combined global and local loads in the hogging and alternate hold loading condition using nonlinear finite element analysis [J] . Zhi Shu, Torgeir Moan Journal of marine science and technology . 2012,第1期

机译：利用有限元非线性分析在整体载荷和局部载荷共同作用下的散装船极限船体梁强度。
3. Evaluating rating factor for prestressed concrete girder bridges by nonlinear finite element analysis [J] . Ju Minkwan, Moon Doyoung, Kim Gyuseon, Structure and Infrastructure Engineering . 2015,第7a9期

机译：用非线性有限元分析法评估预应力混凝土梁桥的额定系数
4. FINITE ELEMENT ANALYSIS ON THE SHIP HULL GIRDER UNDER LONGITUDINAL BENDING WITH BOTTOM DAMAGE [C] . M Z Muis Alie International Conference on Ship and Offshore Technology . 2015

机译：底部损伤纵向弯曲下船壳梁的有限元分析
5. Evaluating the Role of Cross-Frames in Stress Distribution of Steel I-Girder Bridges by "Holistic" Assessment of Finite Element Analysis Data [D] . Radovic, Matija. 2017

机译：通过有限元分析数据的“整体”评估，评估横框架在钢工字钢桥应力分布中的作用
6. Bone preserving level of osteotomy in short-stem total hip arthroplasty does not influence stress shielding dimensions – a comparing finite elements analysis [O] . Rene Burchard, Sabrina Braas, Christian Soost, 2017

机译：短茎全髋关节置换术中保持骨截骨的水平不影响应力屏蔽尺寸–有限元比较分析
7. Ultimate Longitudinal Strength of Ships' Hull Girder under Combined Loading — 3rd Report: Introduction of the effect of bulkheads and side structures to torsional analysis with using 1 dimensional finite element method — [O] . Yusuke Komoriyama, Yoshiteru Tanaka, Akira Tatsumi, 2019

机译：船舶船体围岩纵向强度在载荷组合下 - 第3次报告：使用1尺寸有限元方法引入舱壁和侧面结构对扭转分析的影响 -

Linear structural stress analysis of a hull girder penetration and a short longitudinal bulkhead using finite element modeling.

摘要

著录项

相似文献

相关主题

期刊订阅