首页> 外文OA文献 >Direct kinematics and analytical solution to 3RRR parallel planar mechanisms
【2h】

Direct kinematics and analytical solution to 3RRR parallel planar mechanisms

机译:3RRR平行平面机构的直接运动学和解析解

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This paper presents the direct kinematic solutions to 3DOF planar parallel mechanisms. Efforts to solve the direct kinematics of planar parallel mechanisms have concentrated on RPR mechanisms due to its inherent simplicity. It is established that the direct kinematic equations of a general 3DOF planar parallel mechanism can be reduced to a univariate polynomial of degree 8. This paper presents the derivation of this univariate polynomials for both 3RRR and 3RPR mechanisms, showing the similarities and differences between the two common configurations of 3DOF planar parallel mechanisms. This paper also presents the on the direct kinematic solution to a simplified case of the 3RRR planar parallel mechanisms, where it is possible to decouple the polynomial further into two quadratic equations, describing the position and orientation of the end-effector, respectively. This result will provide an efficient computation method for a very useful configuration of planar parallel manipulators.
机译:本文提出了3DOF平面并联机构的直接运动学解决方案。由于其固有的简单性,解决平面并联机构的直接运动学的努力集中在RPR机构上。可以确定一般的3DOF平面并联机构的直接运动学方程可以简化为8级的单变量多项式。本文介绍了3RRR和3RPR机理的单变量多项式的推导,显示了两者之间的异同3DOF平面并联机构的常见配置。本文还针对3RRR平面并联机构的简化情况提供了直接运动学解决方案,其中可以将多项式进一步解耦为两个二次方程,分别描述末端执行器的位置和方向。该结果将为平面平行操纵器的非常有用的配置提供一种有效的计算方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号