首页> 外文OA文献 >Penerapan Teknologi Fermentasi Pada Bioproses Fermentasi Minyak Kelapa (Fermikel)* [Bioprocessing of Fermented Coconut Oil by Application of Fermentation Technology]
【2h】

Penerapan Teknologi Fermentasi Pada Bioproses Fermentasi Minyak Kelapa (Fermikel)* [Bioprocessing of Fermented Coconut Oil by Application of Fermentation Technology]

机译:发酵技术在发酵椰子油(费米克尔)的生物加工中的应用* [通过发酵技术对发酵椰子油进行生物加工]

摘要

Methods of extracting oil from coconut endosperm by fermentatbn were studied. The factors which must be controlled to break the emulsion and liberate oil were investigated. It was found that grinding conditions exerted a profound effect upon the stability of the coconut milk emulsion. The optimum condition for rapid fermentathn of coconut milk was related to the condition during incubation period. The fermentation progressed best under mild conditions (28°-40 °Cj. The fermentation was successful in breaking the emulsion at a relatively broad of range and titrable acidity. Coconut cream and small volume of coconut water and "lontar" (palmyra palmj-sap were incubated separately with some strains of Bacillus species, which were preincubated in a coconut tomato-extract sugar (CTSj medium using a shaker, and grown as a starter under conditions that allowed for coconut oil production at pH 4,0-5,0 and 30 °- 40 "C for 12-24 h. The organism destabilizes the emulsion, apparently by metabolizing sugars, resulting in the production of protein curd and high-quality oil. The palm sap and coconut water to the cream ratio of fermentation medium influenced the performance of oil produced and the bacteria grew well and produced oil in non sterile systems. The oil recovered was about 25 to 20% while average amount of oil in the coconut is approximately 25-35%, which means that only 83,33 to 66,67% oil was recovered. The oil contained little free fatty acid and very low concentration of cholesterol (0,0095 mg/ml), while the traditional coconut oil and commercially palm oil were 0,0111 mg/ml and 0,0132 mg/ml, respectively.
机译:研究了发酵法从椰子胚乳中提取油的方法。研究了破坏乳状液和释放油必须控制的因素。发现研磨条件对椰子乳乳液的稳定性产生了深远的影响。快速发酵椰奶的最佳条件与潜伏期的条件有关。在温和的条件下(28°-40°Cj,发酵进展最好。发酵成功地在相对较宽的范围和可滴定的酸度下打破了乳状液。椰子奶油和少量椰子水和“ lontar”(palmyra palmj-汁液分别与一些芽孢杆菌属菌株一起孵育,然后在摇床中在椰子番茄提取糖(CTSj培养基)中预孵育,并在允许pH 4.0-5.0的椰子油生产条件下作为发酵剂生长。和30°C-40“ C持续12-24 h。该生物破坏了乳状液的稳定性,显然是通过代谢糖而导致的蛋白质凝乳和优质油的产生。棕榈汁和椰子水与发酵的奶油比例培养基会影响所产生的油脂的性能,细菌在非无菌系统中生长良好并产生油脂,所回收的油脂约为25%至20%,而椰子中的油脂平均含量约为25-35%,这意味着只有83% 33至66回收到67%的油。该油含有很少的游离脂肪酸,胆固醇含量非常低(0.0095 mg / ml),而传统椰子油和商业棕榈油分别为0.0111 mg / ml和0132 mg / ml。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号