首页> 外文OA文献 >Performance of Organic Rankine Cycle in Different Refrigerants for Low Temperature Geothermal Using Delphi Program
【2h】

Performance of Organic Rankine Cycle in Different Refrigerants for Low Temperature Geothermal Using Delphi Program

机译:Delphi程序在低温低温地热中不同制冷剂中有机朗肯循环的性能

摘要

A software has been developed in a Windows-based Delphi programming for analyzing the influence of the transport and thermodynamic properties of the refrigerants on the performance of the Organic Rankine Cycle (ORC). Its user-friendly drag and drop icon format and excellent color graphics make it an interactive tool for teaching and the preliminary design of the ORC system. The research was carried out by analyzing the performance of the system components and the overall ORC based on the several working fluids within R22, R123, R134a and RC318. The pressure of evaporator was varied in two steps 7 and 12 bar, while the condenser was kept constant pressure at 1 bar. The turbine inlet temperature was varied in the range 100 0C to 140 0C where the various isentropic efficiency inputs were applied for pump and turbine. By increasing turbine inlet temperature, R22 has the highest turbine work output and cycle efficiency. Contrary, RC318 has the lowest cycle efficiency and decreases trend with enhancing in turbine inlet temperature. RC318 has low latent heat of vaporization thus vaporizes under relatively very low evaporator heat supply.
机译:已经在基于Windows的Delphi程序中开发了一个软件,用于分析制冷剂的传输和热力学性质对有机朗肯循环(ORC)性能的影响。它具有友好的拖放图标格式和出色的彩色图形,使其成为ORC系统的教学和初步设计的交互式工具。通过基于R22,R123,R134a和RC318中的几种工作流体来分析系统组件的性能和整个ORC,从而进行了研究。蒸发器的压力在两个步骤7和12 bar中变化,而冷凝器保持恒定压力在1 bar。涡轮进口温度在100 0C到140 0C的范围内变化,其中将各种等熵效率输入应用于泵和涡轮。通过提高涡轮进口温度,R22具有最高的涡轮功输出和循环效率。相反,RC318具有最低的循环效率,并且随着涡轮进口温度的升高而降低趋势。 RC318的蒸发潜热低,因此在蒸发器供热量相对较低的情况下蒸发。

著录项

  • 作者

    Prabowo; G.T., Andre; Ekadewi;

  • 作者单位
  • 年度 2010
  • 总页数
  • 原文格式 PDF
  • 正文语种 EN
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号