Thermal comfort in a production process will increase the productivity of labor. Thermal comfort is affected by the dry bulb temperature, relative humidity and ventilation systems. The design space of the production process is designed to have area 1500 m2 and has six cooling towers. From the research results obtained the production process of circulation space which occurred 26.5 / h, air flow rate into the system is 0.9648 m / s with a correction factor of 0.4, has a power ventilation evaporative cooling tower total of 5472 Watts and has a cooling load 18 173, 3 kW. This condition is able to meet the thermal comfort requirements for the production of space used as a kitchen and a number of employees about 100 people. The design of cooling towers to meet the needs of the cooling load around 4%.
展开▼
机译：生产过程中的热舒适性将提高劳动生产率。干球温度，相对湿度和通风系统会影响热舒适度。生产过程的设计空间设计为面积为1500平方米，并具有六个冷却塔。从研究结果中得出的循环空间生产过程发生时间为26.5 / h，进入系统的空气流量为0.9648 m / s，校正系数为0.4，动力通风蒸发冷却塔总容量为5472瓦，并具有冷却功能。负载18173，3 kW。此条件能够满足用作厨房的生产空间的热舒适性要求，并且约有100名员工。冷却塔的设计满足了4％左右的冷却负荷需求。
展开▼
