首页> 外文OA文献 >Blends of linear-low-density polyethylene and thermoplastic bloodmeal using maleic anhydride grafted polyethylene as compatibilizer
【2h】

Blends of linear-low-density polyethylene and thermoplastic bloodmeal using maleic anhydride grafted polyethylene as compatibilizer

机译:线性低密度聚乙烯和热塑性血粉的混合物,以马来酸酐接枝的聚乙烯为增容剂

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Linear Low-Density Polyethylene (LLDPE) was blended with Novatein Thermoplastic from bloodmeal (NTP.) The compatibilizing effect of maleic anhydride grafted polyethylene (PE-g-MAH) on mechanical, morphology thermal properties and water absorption were studied and compared with blends without compatibilizer .The amount of polyethylene added was varied between 20% to 70% with 10% of compatibilizer. An improvement in compatibility between NTP and LLDPE was evident across the entire composition range only when using compatibilizer. The tensile strength of blends decreased over that pure LLDPE, but never dropped below that of pure NTP. Results showed that blending NTP with LLDPE decreased water absorption significantly, even more so using a compatibilizer. The result is a more water stable material.
机译:将线性低密度聚乙烯(LLDPE)与血粉中的Novatein热塑性塑料(NTP)混合。研究了顺丁烯二酸酐接枝聚乙烯(PE-g-MAH)对机械,形态热学性质和吸水率的增容作用,并与未掺入的共混物进行了比较。聚乙烯的添加量在20%到70%之间变化,其中添加了10%的增容剂。仅当使用增容剂时,在整个组成范围内,NTP和LLDPE之间的相容性才得到改善。共混物的抗张强度比纯LLDPE降低,但从未低于纯NTP。结果表明,将NTP与LLDPE混合可显着降低吸水率,使用增容剂则更是如此。结果是更水稳定的材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号