The purpose of this study was to locate the 3D spatial position mandibular cast and determine its occlusal contacts in a novel way by using an intraoral scanner as part of the virtual occlusal record procedure. This study also analyzes the requirements in quantity and dimensions of the intraoral virtual occlusal record. The results showed that the best section combination consists of 2 lateral and frontal sections, the width of this section being that of 2 teeth (24 mm x 15 mm). This study concluded that this procedure was accurate enough to locate the mandibular cast on a virtual articulator. However, at least 2 sections of the virtual occlusal records were necessary, and the best results were obtained when the distance between these sections was maximum.
展开▼
机译:这项研究的目的是通过使用口内扫描仪作为虚拟咬合记录程序的一部分,以新颖的方式定位3D空间位置的下颌石膏并确定其咬合接触。这项研究还分析了口内虚拟咬合记录的数量和尺寸要求。结果表明,最佳的断面组合由2个侧面和正面部分组成,该部分的宽度为2个齿(24 mm x 15 mm)。这项研究得出的结论是,该过程足够准确,可以将下颌石膏放置在虚拟咬合架上。但是,至少需要2个虚拟咬合记录部分,并且当这些部分之间的距离最大时可获得最佳结果。
展开▼