首页> 外文OA文献 >Decentralized Robust Control of Robot Manipulators with Harmonic Drive Transmission and Application to Modular and Reconfigurable Serial Arms
【2h】

Decentralized Robust Control of Robot Manipulators with Harmonic Drive Transmission and Application to Modular and Reconfigurable Serial Arms

机译:具有谐波传动装置的机器人机械手的分散鲁棒控制及其在模块化和可重构串行臂上的应用

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this paper, we propose a decentralized robust control algorithm for modular and reconfigurable robots (MRRs) based on Lyapunov’s stability analysis and backstepping techniques. In using decentralized control schemes with robot manipulators, each joint is considered as an independent subsystem, and the dynamical effects from the other links and joints are treated as disturbance. However, there exist many uncertainties due to unmodeled dynamics, varying payloads, harmonic drive (HD) compliance, HD complex gear meshing mechanisms, etc. Also, while the reconfigurability of MRRs is advantageous, modifying the configuration will result in changes to the robot dynamics parameters, thereby making it challenging to tune the control system. All the above mentioned disturbances in addition to reconfigurability present a challenge in controlling MRRs. The proposed controller is well-suited for MRR applications because of its simple structure that does not require the exact knowledge of the dynamic parameters of the configurations. Desired tracking performance can be achieved via tuning a limited set of parameters of the robust controller. If the numbers of degrees of freedom are held constant, these parameters are shown to be relatively independent of the configuration, and can be held constant between changes in configuration. This strategy is novel compared to existing MRR control methods. In order to validate the controller performance, experimental setup and results are also presented.
机译:在本文中,我们基于Lyapunov的稳定性分析和反推技术,提出了一种用于模块化和可重构机器人(MRR)的分散鲁棒控制算法。在机器人机械手中使用分散控制方案时,每个关节都被视为一个独立的子系统,而其他链接和关节的动力效应则被视为干扰。但是,由于未建模的动力学,有效载荷变化,谐波驱动(HD)顺应性,HD复杂齿轮啮合机制等,存在许多不确定性。此外,虽然MRR的可重新配置性是有利的,但修改配置将导致机器人动力学的变化参数,因此很难调整控制系统。除了可重构性以外,所有上述所有干扰都对控制MRR提出了挑战。所提出的控制器非常适合MRR应用,因为它的结构简单,不需要确切了解配置的动态参数。可以通过调整鲁棒控制器的一组有限参数来实现所需的跟踪性能。如果自由度的数量保持恒定,则这些参数显示为相对独立于配置,并且可以在配置变化之间保持恒定。与现有的MRR控制方法相比,该策略是新颖的。为了验证控制器的性能,还介绍了实验装置和结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号