首页> 外文OA文献 >Effect of Saltwater Absorption/Desorption Cycling on Strength of Carbon Fibre/Epoxy Composites
【2h】

Effect of Saltwater Absorption/Desorption Cycling on Strength of Carbon Fibre/Epoxy Composites

机译:盐水吸收/解吸循环对碳纤维/环氧复合材料强度的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The use of carbon/epoxy composites is ever increasing in the aerospace industry. The topic of saltwater absorption/desorption cycling effects is of interest as aircraft will experience significant moisture absorption/desorption and thermal cycles both during the short time scale of a sortie, as well as during the long time scale of service life. Coupled with this is exposure to elements, such as salt, from the environment. Carbon/epoxy materials are known to absorb moisture throughout their service life, and the extent of this absorption and its effects on the material may be estimated. It is generally assumed that the effects of fresh water absorption are reversible upon drying with respect to some basic characteristics such as glass transition temperature and associated mechanical properties. It is also acknowledged that repeated fresh water cycling does not have significant negative effects. However, the effect of a very common component of the environment, salt (NaCl), has had little attention in the research to-date. It has been seen in the few experiments conducted on carbon/epoxy, that saltwater/seawater conditioning degrades matrix-dominated properties to a greater degree than fresh water conditioning.The effects of repeated cycles of saltwater absorption/desorption on short-beam strength of carbon/epoxy composite materials are explored in this thesis. Experiments were conducted on Toray T700S/Cytec MTM57 plain weave carbon/epoxy composite material. The material was exposed to four cycles of immersion to saturation and drying and the gravimetric results obtained. The diffusion constants for absorption of fresh water and of salt water were obtained. Finally, the short-beam strength was tested for saltwater-cycled versus as-manufactured Toray T700S/Cytec MTM57 material. A relative reduction in strength of approximately 10% was observed.These results indicate that cycles of saltwater have irreversible effects. And further studies into the effects of the cyclic saltwater environment may be useful for the development of design allowables of composite materials employed in aircraft.
机译:碳/环氧复合材料的使用在航空航天工业中正在不断增加。咸水吸收/解吸循环效应是一个有趣的话题,因为飞机将在短距离的飞行中以及长时间的使用寿命中经历大量的水分吸收/解吸和热循环。与此相伴的是暴露于环境中的盐等元素。已知碳/环氧树脂材料在其整个使用寿命中都会吸收水分,并且可以估计这种吸收的程度及其对材料的影响。通常认为,就某些基本特性(例如玻璃化转变温度和相关的机械性能)而言,干燥后淡水的吸收效果是可逆的。还公认的是,重复的淡水循环不会产生明显的负面影响。然而,迄今为止,环境中非常常见的成分盐(NaCl)的影响很少受到关注。在碳/环氧树脂上进行的一些实验中已经看到,盐水/海水调节比基质水调节更大程度地降低了以基质为主的性能。盐水重复吸收/解吸循环对碳短束强度的影响本文研究了环氧/环氧复合材料。在Toray T700S / Cytec MTM57平纹碳/环氧树脂复合材料上进行了实验。使该材料经历四个浸入饱和和干燥循环,并获得重量分析结果。得到吸收淡水和盐水的扩散常数。最终,测试了盐水循环和人造Toray T700S / Cytec MTM57材料的近光强度。观察到强度相对降低约10%,这些结果表明盐水循环具有不可逆的作用。进一步研究循环咸水环境的影响可能有助于开发飞机所用复合材料的设计允许范围。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号