首页> 外文OA文献 >Microstructure and Properties of Ti-8Mo-12Fe and Ti-8Mo-8Cu alloys with Cr3C2 Additives Produced in the Powder Metallurgy Processes

【2h】

Microstructure and Properties of Ti-8Mo-12Fe and Ti-8Mo-8Cu alloys with Cr3C2 Additives Produced in the Powder Metallurgy Processes

机译：粉末冶金过程中含Cr3C2添加剂的Ti-8Mo-12Fe和Ti-8Mo-8Cu合金的组织和性能

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Tsai Jung-Ting; Han Cheng-Yu; Liang Cheng; Lin Shung-Tian;
展开▼
作者单位

展开▼
年度 2012
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effects of heat treatment processes on the microstructures and properties of powder metallurgy produced Cu-Ni-Si-Cr alloy [J] . Huei-Sen Wang, Hou-Guang Chen, Jhen-Wang Gu, Materials Science and Engineering . 2014,第deca1期

机译：热处理工艺对粉末冶金Cu-Ni-Si-Cr合金组织和性能的影响
2. Microstructure and mechanical properties of ultrafine grained Cu-0.8 wt%C alloy with a bimodal microstructure produced by powder metallurgy techniques [J] . Wenjing Wang, Wei Zeng, Chenguang Li, Materials Science and Engineering . 2018,第JANa17期

机译：粉末冶金技术制备的具有双峰微结构的Cu-0.8 wt％C超细晶粒合金的组织和力学性能
3. Microstructure and properties of high strength Al-Fe-Cu-Si-Zn alloy (AA8079) produced by mechanical alloying and powder metallurgy [J] . Meignanamoorthy Meiyanathan, Ravichandran Manickam, Vidhya Vinoth Sundar, Materialpruefung: Werkstoffe und Bauteile, Forschung Prufung Anwendung . 2019,第7期

机译：机械合金化和粉末冶金生产高强度Al-Fe-Cu-Si-Zn合金（AA8079）的组织及性能
4. Microstructure and Properties of Ti-8Mo-12Fe and Ti-8Mo-8Cu alloys with Cr_3C_2 Additives Produced in the Powder Metallurgy Processes [C] . Jung-Ting Tsai, Cheng-Yu Han, Cheng Liang, IUMRS International Conference in Asia . 2011

机译：Ti-8Mo-12Fe和Ti-8Mo-8Cu合金与CR_3C_2添加剂中的组织和性能，粉末冶金过程中生产的添加剂
5. EFFECTS OF CHEMISTRY AND PROCESSING ON THE FRACTURE RELATED PROPERTIES OF P/M ALUMINUM ALLOY CT91 (FATIGUE, MICROSTRUCTURE, POWDER METALLURGY). [D] . GRIFFITH, WALTER MARLIN, JR. 1984

机译：化学和加工工艺对P / M铝合金CT91的断裂相关性能（疲劳，显微组织，粉末冶金）的影响。
6. Data on processing of Ti-25Nb-25Zr β-titanium alloys via powder metallurgy route: Methodology microstructure and mechanical properties [O] . D. Ueda, G. Dirras, A. Hocini, 2018

机译：粉末冶金工艺加工Ti-25Nb-25Zrβ-钛合金的数据：方法显微组织和力学性能
7. Microstructure and mechanical properties of Ni3Al base alloy reinforced with Cr particles produced by powder metallurgy [O] . García Barriocanal J., Pérez Zubiaur Pablo, Garcés Gerardo, 2013

机译：粉末冶金制备的Cr颗粒增强Ni3Al基合金的组织和力学性能
8. Correlation of Processing Parameters, Microstructure, and Mechanical Properties of High Strength Powder Metallurgically Produced Aluminum Alloys [R] . Voss, D. 1979

机译：高强度粉末冶金铝合金工艺参数，组织和力学性能的相关性

Microstructure and Properties of Ti-8Mo-12Fe and Ti-8Mo-8Cu alloys with Cr3C2 Additives Produced in the Powder Metallurgy Processes

著录项

引文网络

相似文献

相关主题

期刊订阅