首页> 外文OA文献 >Quantification of Thickness Effects for Circumferential Through-Wall Cracked Pipe Bend with Un-Uniform Thickness under In-Plane Opening Bending

【2h】

Quantification of Thickness Effects for Circumferential Through-Wall Cracked Pipe Bend with Un-Uniform Thickness under In-Plane Opening Bending

机译：平面内开口弯曲下厚度不均匀的周向贯穿式裂纹管弯曲的厚度效应量化

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Kim C.-G.; Bae K.-D.; Kim Y.-J.;
展开▼
作者单位

展开▼
年度 2015
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Crack-opening-area analyses for circumferential through-wall cracks in pipes-part Ⅲ: off-center cracks, restraint of bending, thickness transition and weld residual stresses [J] . S. Rahman, N. Ghadiali, G. M. Wilkowski, International Journal of Pressure Vessels and Piping . 1998,第5期

机译：管道周向贯穿壁裂纹的开孔面积分析：第三部分：偏心裂纹，弯曲约束，厚度过渡和焊接残余应力
2. Limit loads for un-cracked and circumferential through-wall cracked pipe bends under torsion moment considering geometric nonlinearity [J] . Li Jian, Zhou Chang-Yu, Chang Le, Thin-Walled Structures . 2017,第jula期

机译：考虑几何非线性的扭转力矩下无裂纹和周向贯穿壁开裂管弯的极限载荷
3. Assessment of plastic loads of critical throughwall circumferentially cracked pipe bends with structural distortions under in-plane bending [J] . Sumesh S., Veerappan A. R., Shanmugam S. Thin-Walled Structures . 2016,第jula期

机译：在面内弯曲下评估具有结构变形的关键贯穿壁圆周裂纹管弯的塑性载荷
4. Quantification of Thickness Effects for Circumferential Through-Wall Cracked Pipe Bend with Un-Uniform Thickness under In-Plane Opening Bending [C] . C.-G. Kim, K.-D. Bae, Y.-J. Kim International Conference on Pressure Vessel Technology . 2016

机译：在平面内开口弯曲下具有不均匀厚度的圆周通壁裂纹管弯曲的厚度效应的定量
5. Measurement of backfill effects on circumferential bending in lined-corrugated thermoplastic pipes and fibre reinforced cement pipes. [D] . Munro, Scott Matthew. 2006

机译：测量衬里波纹热塑性管和纤维增强水泥管中回填对周向弯曲的影响。
6. Numerical Investigation of Temperature Distribution in an Eroded Bend Pipe and Prediction of Erosion Reduced Thickness [O] . Hongjun Zhu, Guang Feng, Qijun Wang -1

机译：弯曲弯管内温度分布的数值研究及减薄厚度的预测
7. Crack-opening-area analyses for circumferential through-wall cracks in pipes - Part III: off-center cracks, restraint of bending, thickness transition and weld residual stresses [O] . S. Rahman, N. Ghadiali, G. M. Wilkowski, 1998

机译：管道周向穿墙裂缝的裂缝开口面积分析 - 第三部分：偏心裂缝，弯曲约束，厚度过渡和焊缝残余应力
8. Experimental and analytical studies of leak-before-break on circumferentially through-wall cracked pipes under bending load : Part-1 (September 1993 - June 1994) [R] . Mahanty, D. K. , Kushwaha, H. S. , Mahajan, S. C. , 1994

机译：弯曲载荷下周向穿墙裂缝管道破裂前泄漏的实验和分析研究：第1部分（1993年9月 - 1994年6月）

Quantification of Thickness Effects for Circumferential Through-Wall Cracked Pipe Bend with Un-Uniform Thickness under In-Plane Opening Bending

著录项

引文网络

相似文献

相关主题

期刊订阅