首页> 外文OA文献 >A Novel Approach for High Deposition Rate Cladding with Minimal Dilution with an Arc – Laser Process Combination

【2h】

A Novel Approach for High Deposition Rate Cladding with Minimal Dilution with an Arc – Laser Process Combination

机译：采用电弧-激光工艺组合的最小稀释度的高沉积速率熔覆的新方法

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Barroi A.; Hermsdorf J.; Prank U.; Kaierle S.;
展开▼
作者单位

展开▼
年度 2013
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution [J] . Reddy L., Preston S. P., Shipway P. H., Surface & Coatings Technology . 2018,第期

机译：激光包层基合金的方法参数优化：沉积效率，孔隙度和稀释的预测模型
2. Highspeed-plasma-laser-cladding of thin wear resistance coatings: A process approach as a hybrid metal deposition-technology [J] . Brunner-Schwer C., Petrat T., Graf B., Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology . 2019,第期

机译：薄耐磨涂层的高速 - 等离子体激光包层：一种作为杂交金属沉积技术的方法方法
3. Dilution effect on the formation of amorphous phase in the laser cladded Ni-Fe-B-Si-Nb coatings after laser remelting process [J] . RuifengLi, Zhuguo Li, Jian Huang, Applied Surface Science . 2012,第20期

机译：重熔后Ni-Fe-B-Si-Nb激光熔覆Ni-Fe-B-Si-Nb涂层对非晶相形成的稀释效应
4. A novel approach for high deposition rate cladding with minimal dilution with an arc - laser process combination [C] . A. Barroi, J. Hermsdorf, U. Prank, International WLT Conference on Lasers in Manufacturing . 2013

机译：具有电弧激光过程组合的最小稀释速率包层的新方法
5. Plasma optical emission spectroscopy of laser cladding for process control and oxidation behavior of laser clad NbAl alloys. [D] . Tewari, Sudhir Kumar. 1995

机译：激光熔覆层的等离子体发射光谱，用于过程控制和激光熔覆NbAl合金的氧化行为。
6. Effects of Substrate Preheating Temperatures on the Microstructure Properties and Residual Stress of 12CrNi2 Prepared by Laser Cladding Deposition Technique [O] . Chenggang Ding, Xu Cui, Jianqiang Jiao, 2018

机译：基底预热温度对激光熔覆沉积技术制备的12CrNi2的组织性能和残余应力的影响
7. Influences of processing parameters on dilution ratio of laser cladding layer during laser metal deposition shaping [O] . Zhang K(张凯), Zhang XM(张新敏), Liu WJ(刘伟军) 2012

机译：工艺参数对激光熔覆成形中激光熔覆层稀释率的影响

A Novel Approach for High Deposition Rate Cladding with Minimal Dilution with an Arc – Laser Process Combination

著录项

引文网络

相似文献

相关主题

期刊订阅