首页> 外文OA文献 >Electrochemical formation of porous copper 7, 7, 8, 8-tetracyanoquinodimethane and copper 2, 3, 5, 6-tetrafluoro-7, 7, 8, 8-tetracyanoquinodimethane honeycomb surfaces with superhydrophobic properties
【2h】

Electrochemical formation of porous copper 7, 7, 8, 8-tetracyanoquinodimethane and copper 2, 3, 5, 6-tetrafluoro-7, 7, 8, 8-tetracyanoquinodimethane honeycomb surfaces with superhydrophobic properties

机译:电化学形成具有超疏水特性的多孔铜7、7、8、8-四氰基醌二甲烷和铜2、3、5、6-四氟7、7、8、8-四氰基醌二甲烷蜂窝表面

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The electrochemical formation of highly porous CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) and CuTCNQF4 (TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) materials was undertaken via the spontaneous redox reaction between a porous copper template, created using a hydrogen bubbling template technique, and an acetonitrile solution containing TCNQ or TCNQF4. It was found that activation of the surface via vigorous hydrogen evolution that occurs during porous copper deposition and TCNQ mass transport being hindered through the porous network of the copper template influenced the growth of CuTCNQ and CuTCNQF4. This approach resulted in the fabrication of a honeycomb layered type structure where the internal walls consist of very fine crystalline needles or spikes. This combination of microscopic and nanoscopic roughness was found to be extremely beneficial for anti-wetting properties where superhydrophobic materials with contact angles as high as 177° were created. Given that CuTCNQ and CuTCNQF4 have shown potential as molecular based electronic materials in the area of switching and field emission, the creation of a surface that is moisture resistant may be of applied interest.
机译:高孔CuCuNQ(TCNQ = 7,7,8,8-四氰基喹二甲烷)和CuTCNQF4(TCNQF4 = 2,3,5,6-四氟-7,7,8,8-四氰基喹甲烷)材料的电化学形成是通过使用氢气鼓泡模板技术生成的多孔铜模板与包含TCNQ或TCNQF4的乙腈溶液之间的自发氧化还原反应。发现通过在多孔铜沉积过程中发生的剧烈氢逸出以及通过铜模板的多孔网络阻碍TCNQ质量传输而引起的表面活化影响了CuTCNQ和CuTCNQF4的生长。这种方法导致了蜂窝状分层结构的制造,其中内壁由非常细的晶体针或尖刺组成。发现微观和纳米粗糙度的这种结合对于产生接触角高达177°的超疏水材料的抗湿性非常有利。鉴于CuTCNQ和CuTCNQF4在开关和场发射领域已显示出作为基于分子的电子材料的潜力,因此耐湿表面的创建可能会引起人们的关注。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号