The use of bottled water is now more and more users, in addition toudpractical without the cooking process the price is competitive whenudcompared to boil the water. The use of bottled water for dispensers (inudIndonesian is “gallon”) is widely used among households. But there areudproblem in the activities of the installation the gallon to dispenser.udLifting bottle about 20 kg is usually done by adults (especially strongudmen), and would be very risky if it must be done by the lady of parents. Inudfact it can be fatal and risky activity, because the magnitude of the force onudthe wrong work postures can cause injury to the spine and joints. Therefore,udto look for ways how to perform these functions with a small force, therebyudreducing the risk of injury.udIn this thesis, the author would raise the research on the design ofudthe bottle installer engine (gallon) of drinking water to the dispenser. Thisuddesign has the following specifications: length 800 mm, width 540 mm andudmaximum height 1500 mm. Using a DC motor drive 180 rpm with a torqueudof 10 N.m, 24 VDC and 95 watts of power, using a chain-sprocketudtransmission system no. 25, and the load capacity can be raised by 20 kg.
展开▼
