To make workshop drawings for a wooden frame structure, computer programmes are used that also have a possibility to transfer data to a CNC machine. In the process of design of wood framing systems it is extremely important to choose the right type of wood joints. In order to make the design easy to manufacture; to allow for quick transfer to a CNC machine and to fulfil the structural requirements, the right joints between the individual structural elements should be selected.udThis thesis presents the design development of workshop drawings and data processing for transfer to a CNC machine. The approach is demonstrated on a simple single-family house and makes use of some of the most commonly used wooden joints between elements: bottom plate – wall stud, wall stud – diagonal bracing, single stud – horizontal plate. udEach CNC machine is manufactured according to a request of a customer, who can choose between different aggregates. Some basic types of Hundegger’s CNC machines are shownudand described. udWooden joints were analysed on the basis of the time needed by the CNC machine for their production, and so the total processing time for the facility was specified.
展开▼